Formation of Nonequilibrium Phases at Collision Interface in an Explosively Welded Ti/Ni Clad

THE FORMATION OF TiAl3 DURING HEAT TREATMENT IN EXPLOSIVELY WELDED Ti-Al MULTILAYERS

Metallic-intermetallic laminate (MIL) composites are promising materials for structural applications especially in the aerospace industry. One of the interesting laminate composites is the Ti-TiAl 3 multilayer. In this work, commercially pure sheets of aluminum and titanium with almost equal thickness of around 0.5 mm were explosively joined. The achieved multilayers were annealed at 630 ℃in di...

Composition at the interface between multicomponent nonequilibrium fluid phases.

The computation of mass transfer between two nonequilibrium phases requires interfacial composition. For a system with a total of M components, the assumption of local thermodynamic equilibrium provides only M equations while the number of unknown interfacial compositions is 2(M-1). In binary systems (M=2), the number of equations matches the number of unknowns and the interfacial composition i...

Electro-Coalescence of an Aqueous Droplet at an Oil–Water Interface with an Investigation of Secondary Droplets Formation

An Experimental Study on the process parameters of Incremental Forming of Explosively-Welded Al/Cu Bimetal

Single point incremental sheet metal forming is a sheet metal forming process that forms products without the complex dies and tools with low cost. In this study, the incremental sheet metal forming process has been experimentally investigated on the explosively-welded Al/Cu bimetal sheets. Also, the effects of process parameters, such as arrangement of layer`s bimetal, tool diameter and tool p...

Nonequilibrium thermodynamics of an interface.

Interfacial thermodynamics has deep ramifications in understanding the boundary conditions of transport theories. We present a formulation of local equilibrium for interfaces that extends the thermodynamics of the "dividing surface," as introduced by Gibbs, to nonequilibrium settings such as evaporation or condensation. By identifying the precise position of the dividing surface in the interfac...