Forming of Stainless Steels : Bending and Press Forming

Development of Alumina-Forming Austenitic Stainless Steels

This paper presents the results of the continued development of creep-resistant, alumina-forming austenitic (AFA) stainless steel alloys, which exhibit a unique combination of excellent oxidation resistance via protective alumina (Al2O3) scale formation and high-temperature creep strength through the formation of stable nano-scale MC carbides and intermetallic precipitates. Efforts in fiscal ye...

Cold Forming Stainless Steel Bar and Wire

Dual–Phase Hot–Press Forming Alloy

Hot–press forming steels are formed in a fully austenitic state followed by die– quenching in order to generate martensite and achieve a strong steel. The ductility however, tends to be limited. We explore in this work a novel steel design in which the forming operation is in the two–phase austenite and ferrite field, so that the quenching results in a dual–phase ferrite and martensite microstr...

Sheet Metal Bending: Forming Part Families for Generating Shared Press-Brake Setups

Sheet metal bending press-brakes can be setup to produce more than one type of part without requiring a setup change. To exploit this flexibility, we need setup planning techniques so that press-brake setups can be shared among many different parts. In this paper, we describe algorithms for partitioning a given set of parts into setup compatible part families that can be produced on the same se...

Prediction of Bending Angle for Laser Forming of Tailor Machined Blanks by Neural Network

Tailor-made blanks are sheet metal assemblies with different thicknesses and/or materials and/or surface coatings. A monolithic sheet can be machined to make the required thickness variations that is referred as tailor machined blanks. Due to the thickness variation in tailor machined blanks, laser bending of these blanks is more complicated than monolithic plates. In this article, laser formin...