Fouling Mechanisms Analysis via Combined Fouling Models for Surface Water Ultrafiltration Process
نویسندگان
چکیده
منابع مشابه
Combined Three Mechanisms Models for Membrane Fouling during Microfiltration
Five new mathematical triple fouling models were developed to explore the flux decline behavior during the microfiltration. The first model was developed by the assumption of the successive effects of standard mechanism, intermediate pore blockage and cake formation by using the standard blocking flux expression in the model calculations. The second and third models also obtained by the success...
متن کاملA combined network model for membrane fouling.
Membrane fouling during particle filtration occurs through a variety of mechanisms, including internal pore clogging by contaminants, coverage of pore entrances, and deposition on the membrane surface. Each of these fouling mechanisms results in a decline in the observed flow rate over time, and the decrease in filtration efficiency can be characterized by a unique signature formed by plotting ...
متن کاملMembrane Distillation for Water Recovery and Its Fouling Phenomena
The total volume of water on Earth is circa 300 million cubic miles, with close to 98.0% being salt water and the remaining 2.0% fresh water. It has been increasingly more challenging to harvest fresh water from surface water, seawater and even from wastewater due to the combination of factors, viz. burgeoning population growth, rapid industrialization and climate change. Recently, membrane dis...
متن کاملFouling of Milk Components with Varying Surface and Process Parameters
In this work two approaches against milk fouling in plate heat exchangers were investigated: (i) the temporary increase of the shear forces acting on the surface by superimposing an oscillating flow on the steady flow and thus increasing the mechanical flow forces and (ii) the modification of the energetic surface properties to reduce the adhesive strength between deposit and heat transfer surf...
متن کاملUnderstanding and Control of Biopolymer Fouling in Ultrafiltration of Different Water Types
The present work focuses on understanding and control of biopolymer fouling in ultrafiltration of a typical surface water and nearby secondary effluent for direct and indirect portable use. Characterization results show that both kinds of biopolymers are of similar molecular weight. Longer than one year water quality monitoring results show that the C/N ratio in the secondary effluent biopolyme...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Membranes
سال: 2020
ISSN: 2077-0375
DOI: 10.3390/membranes10070149