Fractography and Porosity Analysis of Cr and Cr-Mo PM Steels
نویسندگان
چکیده
منابع مشابه
Effect of Zr Addition on Mechanical Properties of Cr-Mo Plastic Mold Steels
We investigated the effects of the additions of Zr and other alloying elements on the mechanical properties and microstructure in Cr-Mo plastic mold steels. The addition of alloying elements changed the microstructure of the normalized samples from the upper bainite to lower bainite due to the increased hardenability. The tempering temperature influenced the strength and hardness values, especi...
متن کاملDilatometric analysis of cementite dissolution in hypereutectoid steels containing Cr
Cementite dissolution in hypereutectoid steels containing Cr is analyzed using dilatometry combined with the consideration of the carbon content in the austenite. The results suggest that the austenite transformed from the mixture of ferrite and cementite can be approximated to have a carbon content corresponding to equilibrium with ferrite. The overall dissolution behavior of cementite is desc...
متن کاملProcessing and Microstructure of Cr-Ta and Cr-Ta-Mo Composites
The Cr-Ta alloy with an eutectic structure has a good combination of high strength and oxidation resistance at elevated temperatures up to 1,200°C. It is an ideal candidate for ultrahigh-temperature applications. However, the material shows low ductility and fracture toughness at room temperature. An effective way to improve the ductility and fracture toughness is to obtain an aligned microstru...
متن کاملCORROSION RESISTANCE OF Co-Cr-Mo ALLOY USED IN DENTISTRY ODPORNOŚĆ KOROZYJNA STOPU Co-Cr-Mo WYKORZYSTYWANEGO W STOMATOLOGII
The presented paper studies the effect of the casting technology on the corrosion resistance of Co-Cr-Mo alloy. The investigations were conducted on a commercial alloy with the brand name ARGELOY N.P SPECIAL (Co-Cr-Mo) produced by Argen as well as the same alloy melted and cast by the lost wax casting method performed by a dental technician. The corrosion behavior of the dental alloys in an art...
متن کاملPHASE STABILITY AND SEMICONDUCTING BEHAVIOUR OF LOW ACTIVATION AUSTENITIC MN-CR STEELS
Four compositions of austenitic Mn-Cr steels have been developed successfully for in-vessel component materials in power plant industry. The phase stability of these Mn-Cr steels was studied by and X-ray diffraction (XRD) patterns. XRD patterns have shown that the matrix of these Mn-Cr steels is a single γ-phase structure. The potentiodynamic polarisation curves suggested that these fabricated ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Metallurgy and Materials
سال: 2016
ISSN: 2300-1909
DOI: 10.1515/amm-2016-0263