Fracture Behavior and Acoustic Emission of Optical Fiber SFC Material.
نویسندگان
چکیده
منابع مشابه
Flexural monitoring of carbon fiber/epoxy composite by acoustic emission
Carbon / epoxy composite is one of the most useful polymer matrix composites that has special properties such as high strength-to-weight ratio, high hardness, high corrosion resistance, Resistance to nuclear radiation has high consumption in different industries such as aerospace industry. Therefor monitoring of loading of this type of composite is important. In order to determine failure mecha...
متن کاملstudy and characterization of fiber optical gyroscope مطالعه و مشخصه یابی ژیروسکوپ فیبر نوری(تار نوری)
ژیروسکوپ فیبر نوری fog بر اساس پدیده تداخل ساگنام دو پرتو لیزری از یک فیبر نوری بسیار طولانی داده های لازم را فراهم می آورد
15 صفحه اولAcoustic Emission on Human Femur Tissue Fracture
This study describes the acoustic emission (AE) activity during fracture of human femur tissue under flexural load. The sample is fixed as a cantilever and two AE broadband sensors are placed in different points of the sample, one near the fixing end and the other near the head, where a pin load is applied. The aim is to investigate if AE procedures and indices well established in engineering m...
متن کاملEffect of surface treatments on damping behavior of carbon and glass fiber reinforced friction material
The ability to absorb vibrations in a vehicle during braking conditions depends primarily on the selection of ingredients for a friction material and interfacial adhesion between all these ingredients. In this work, a hybrid brake friction material is developed by combination of carbon fiber (CF), glass fiber (GF), resin and other ingredients. The surfaces of carbon and glass fibers are c...
متن کاملAcoustic Emission Detection Using Fiber Bragg Gratings
A systematic study of acoustic emission detection using fiber Bragg grating sensors is presented. In this, we attempt to use the fiber Bragg grating to sense the dynamic strain created by a passing ultrasonic wave signal. Our goal is to see if such a sensor is possible, and if so, what the detection sensitivity and limitations will be. To answer these questions, we carried out several experimen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1996
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.62.1582