Fracture Mechanics and a Fractographic Study on Thermal Fatigue of Cast Irons
نویسندگان
چکیده
منابع مشابه
Fatigue Behaviour of Synthetic Nodular Cast Irons
A. Vaško, L. Trško, R. Konečná, Faculty of Mechanical Engineering, University of Žilina, Žilina, Slovak Republic The paper shows the influence of charge composition on microstructure, fatigue properties and failure micromechanisms of nodular cast irons. The additive of metallurgical silicon carbide (SiC) in analysed specimens increases the content of ferrite in the matrix, decreases the size of...
متن کاملThe Fracture and Fatigue Properties of Cast Irons Used for Trunk Mains in the Water Industry
In order to assess the remaining life of cast iron assets in the water sector, an understanding of their fracture and fatigue characteristics is necessary. The present work is concerned with the toughness and Paris crack growth behaviour of cast iron materials with a range of microstructures, taken from trunk mains currently in service. When considered with other data from the literature, the r...
متن کاملTHERMAL FATIGUE RESISTANCES OF 356 AND 413 CAST Al ALLOYS
Abstract: Thermal fatigue is a stochastic process often showing considerable scatter even in controlled environments. Due to complexity of thermal fatigue, there is no a complete analytical solution for predicting the effect of this property on the life of various components, subjected to severe thermal fluctuations. Among these components, one can mention car cylinder, cylinder head and pi...
متن کاملFracture Mechanics and Corrosion Fatigue
The development and current state-of-the-art in fracture mechanics in relation to studies of environment-enhanced fatigue-crack growth (corrosion fatigue) and fatigue-crack growth per se are reviewed. Patterns of response of materials to different loading and environmental conditions are considered in terms of the probable mechanisms for environmental embrittlement. The usefulness of the fractu...
متن کاملGeometrical Optimization of the Cast Iron Bullion Moulds Based on Fracture Mechanics
In this paper, the causes of the crack initiation in cast iron bullion moulds in Meybod Steel Corporation are investigated and then some new geometrical models are presented to replace the current moulds. Finally, among the new presented models and according to the life assessment, the best model is selected and suggested as the replaced one. For this purpose, the three recommended moulds were ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1976
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.42.2673