FRACTURE MECHANISM IN Si3N4 – GRAPHENE PLATELETS COMPOSITES

Toughened and machinable glass matrix composites reinforced with graphene and graphene-oxide nano platelets

The processing conditions for preparing well dispersed silica-graphene nanoplatelets and silica-graphene oxide nanoplatelets (GONP) composites were optimized using powder and colloidal processing routes. Fully dense silica-GONP composites with up to 2.5 vol% loading were consolidated using spark plasma sintering. The GONP aligned perpendicularly to the applied pressure during sintering. The fra...

Numerical Investigation of the Fracture Mechanism of Defective Graphene Sheets

Despite the unique occurrences of structural defects in graphene synthesis, the fracture mechanism of a defective graphene sheet has not been fully understood due to the complexities of the defects. In this study, the fracture mechanism of the monolayer graphene with four common types of defects (single vacancy defect, divacancy defect, Stone-Wales defect and line vacancy defect) were investiga...

Mechanical Properties of SiC Fiber- Reinforced Reaction-Bonded Si3N4 Composites

Radar Absorbing Nanocomposites Based MultiLayered Graphene Platelets/Epoxy

Graphene nanostructures were synthesized by Hummer method. 1, 3, 5 and 7 wt% of graphene nanostructures were suspended in certain amount of acetone on a mechanical stirrer and stirred then added to epoxy resin. After 4 hours, solution and Graphene platelets (GPs) were prepared. Nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM ), Fourier transform i...

Prediction of Mode II of Fracture Toughness in Laminate Composites

In this paper, effects of ply orientation of adjacent plies with (ϕ//θ) interfaces on mode II critical strain energy release rate (fracture toughness) of multidirectional (MD) laminate has been studied. Ply orientation of adjacent plies is one of the most important parameters affects the mode II critical strain energy release rate () in the initiation of the delamination. To  study this paramet...