Fracture toughness in metal matrix composites

Prediction of Mode II of Fracture Toughness in Laminate Composites

In this paper, effects of ply orientation of adjacent plies with (ϕ//θ) interfaces on mode II critical strain energy release rate (fracture toughness) of multidirectional (MD) laminate has been studied. Ply orientation of adjacent plies is one of the most important parameters affects the mode II critical strain energy release rate () in the initiation of the delamination. To  study this paramet...

Fracture Toughness of Metal Castings

Fracture Toughness of Polypropylene-Based Particulate Composites

The fracture behaviour of polymers is strongly affected by the addition of rigid particles. Several features of the particles have a decisive influence on the values of the fracture toughness: shape and size, chemical nature, surface nature, concentration by volume, and orientation. Among those of thermoplastic matrix, polypropylene (PP) composites are the most industrially employed for many di...

Fiber Fracture during the Consolidation of Metal Matrix Composites

-A detailed study of conditions leading to fiber fracture during the consolidation of Ti-14wt %A~21 wt%Nb/SiC (SCS-6) composite monotapes has been conducted. For this continuous fiber reinforced composite system, the incidence of fracture increases with consolidation rate at higher process temperatures. Increasing consolidation temperature at a fixed pressure reduces the number of breaks per un...

Fracture Analysis of Particulate Reinforced Metal Matrix Composites

A fracture analysis of highly loaded particulate reinforced composites was performed using laser moire interferometry to measure the displacements within the plastic zone at the tip of an advancing crack. Ten castings were made of five different particulate reinforcement-aluminum alloy combinations. Each casting included net-shape specimens which were used for the evaluation of fracture toughne...