Fracture Toughness of Silicon Carbide Evaluated Using Pre-Cracked Specimens
نویسندگان
چکیده
منابع مشابه
Microstructure and Fracture Toughness of Hot-Pressed Silicon Carbide Reinforced with Silicon Carbide Whisker
The effects of p-Sic whisker addition on the microstructural evolution and fracture toughness (K,c) of hot-pressed SIC were investigated. Most of the whiskers added disappeared during the densification process by transformation into the a-phase. The remaining whiskers acted as nuclei for grain growth, resulting in the formation of large tabular grains around the whiskers. The tabular grains aro...
متن کاملCarbide Structure and Fracture Toughness of High Speed Tool Steels
In the present study, M2 high speed steels were fabricated by using electro-slag rapid remelting process. Carbide structure was analysed and the fracture toughness and hardness were also measured after austenitization treatment at 1190 and 1210C followed by tempering treatment at 535C for billets with various diameters from 16 to 60 mm. Electro-slag rapid remelting (ESRR) process is an advanced...
متن کاملBehavior of Concrete round Double Beam Fracture Toughness Test Specimens
Laboratory fracture toughness tests of concrete using wedge-loaded round double beam specimens with a length to diameter ratio of 2:1 show two distinctly different specimen behaviors. Either the crack remains in the plane of the notch, and a valid test result can be obtained, or there is lateral cracking around mid-length which invalidates the results. Results of a controlled study show that th...
متن کاملFracture Behavior Prediction for Rapidly Loaded Surface Cracked Specimens
The feasibility of predicting the fracture behavior of surface cracks from shallow cracked bend specimens was investigated. The material studied was a high-strength steel stress relief embrittled to various levels of Charpy-V notch impact toughness. Material toughness was quantified in terms of the J-intergral at total specimen failure (-/„,,), using both deeply notched and shallow-notched bend...
متن کاملDetermination of the Fracture Toughness Parameters of Cement Composite Using Specimens with Rounded Notch
The fracture mechanics parameters are used in different applications to formulae the classic criteria of failure as well as in computational models to analyze the concrete structures and other brittle materials. The parameters are determined using the specimens with notches. The study for assessing the influence of the notch curvature in specimen on fracture mechanics parameters, e.g. critical ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME international journal. Ser. 1, Solid mechanics, strength of materials
سال: 1988
ISSN: 0914-8809
DOI: 10.1299/jsmea1988.31.3_575