Free vibrations of thin-walled semicircular graphite-epoxy composite frames
نویسندگان
چکیده
منابع مشابه
Nondestructive Evaluation of Graphite/Epoxy Composite Damage
Ultrasonic and acoustic emission techniques were used to monitor and evaluate material damage in a graphite/epoxy laminate containing a machined hole as an initial flaw and subjected to fully reversed spectrum fatigue loading at room temperature. It was found that the flaw growth progressed radially around the initial hole at a uniform rate during cycling at the lower stress levels. At the high...
متن کاملExtensional and Flexural Waves in a Thin-Walled Graphite/Epoxy Tube*
Simulated acoustic emission signals were induced in a thinwalled graphite/epoxy tube by means of lead breaks (Hsu-Neilsen source). The tube is of similar material and layup to be used by NASA in fabricating the struts of Space Station Freedom. The resulting waveforms were detected by broad band ultrasonic transducers and digitized. Measurements of the velocities of the extensional and flexural ...
متن کاملModeling and Characterization of a Graphite Nanoplatelet/Epoxy Composite
A micromechanical modeling procedure is developed to predict the viscoelastic properties of a graphite nanoplatelet/epoxy composite as a function of volume fraction and nanoplatelet diameter. The predicted storage and loss moduli from the model are compared to measured values from the same material using Dynamical Mechanical Analysis, nanoindentation, and tensile tests. In most cases, the model...
متن کاملPost-buckling and First-ply Failure of Thin-walled Frames and Columns Made of Composite Materials
First-ply failure (FPF) of composite thin-walled columns and frames is investigated in the buckled structure. Elastic behavior is assumed during the pre-buckling and buckling states, and along part of the post-buckling equilibrium path. The Tsai-Hill criterion is employed to identify failure of one ply at one specific location. The technique of analysis is based on evaluation of the post-buckli...
متن کاملEuler Buckling of Thin - Walled Composite Columns •
Pultruded composite structural members with open or closed thin-walled sections are being extensively used as columns for structural applications l1Jhere buckling is the main consideration in the design. In this paper, global buckling is investigated and critical loads are experimentally determined for various fiber reinforced composite I-beams of long column length. Southwell's method is used ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Finite Elements in Analysis and Design
سال: 1991
ISSN: 0168-874X
DOI: 10.1016/0168-874x(91)90018-t