Frequency Response Function Measurement on Simplified Disc Brake Model
نویسندگان
چکیده
منابع مشابه
EFFECT OF CHAMFERED BRAKE PAD PATTERNS ON THE VIBRATION SQUEAL RESPONSE OF DISC BRAKE SYSTEM En-Cheng.Liu,
En-Cheng.Liu, Shih-Wei Kung, Syh-Tsang Jenq , Chie Gau, Hsin-Luen Tsai, Cheng-Ching Lee, and Yu-Der Chen Department of Aeronautics and Astronautics, National Cheng Kung University, Tainan, Taiwan, R.O.C. 2 Dassault Systemes Simulia Central, Cincinnati, Ohio, USA 3 Department of Electronic engineering, Kao Yuan University, Kaohsiung county, Taiwan, R.O.C. Aeronautical Systems Research Division, ...
متن کاملInvestigation of the Coatings Applied onto Brake Discs on Disc-brake Pad Pair
In severe conditions, braking may cause the temperature on the disc-pad interface to rise up to 800 °C 1 . At such a temperature, the properties of organic compounds are disrupted, coefficient of friction (CoF) decreases, and the rate of wear increases exponentially. This phenomenon is called “fade” 2 . Ideal brake pads, without causing any fades, are expected to function in uniform and stable ...
متن کاملHow to play a disc brake
We consider a gyroscopic system with two degrees of freedom under the action of small dissipative and non-conservative positional forces, which has its origin in the models of rotating bodies of revolution being in frictional contact. The spectrum of the unperturbed gyroscopic system forms a ”spectral mesh” in the plane ”frequency – gyroscopic parameter” with double semi-simple purely imaginary...
متن کاملBrake disc surface temperature measurement using a fiber optic two-color pyrometer
A fiber optic two-color pyrometer was developed for brake disc surface temperature measurement. The two-color pyrometer is composed of a fluoride glass fiber and two HgCdTe detectors equipped with bandwidth filters. The two-color pyrometer allows the measurement of brake disc temperature in the 200-800 °C range with a time resolution above 7 μs. Calibration formula for the signals obtained usin...
متن کاملStructural Damage Identification of Plate Structures based on Frequency Response Function and Natural Frequencies
In this paper, a structural damage identification method (SDIM) is developed for plate-like structures. This method is derived using dynamic equation of undamaged/damaged plate, in which local change in flexural rigidity is characterized utilizing a damage distribution function. The SDIM requires to modal data in the intact state and frequency response of damage state where most of vibration ba...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Strojnícky casopis – Journal of Mechanical Engineering
سال: 2018
ISSN: 2450-5471
DOI: 10.2478/scjme-2018-0036