Frequency response of a constant-temperature hot wire to temperature fluctuations.
نویسندگان
چکیده
منابع مشابه
A. Response of Lead Zirconate Titanate Ceramics to Temperature Fluctuations
It has been found that some shapes of lead zirconate titanate (PZT) ceramics respond to rapid temperature fluctuations when mounted in a particular geometrical configuration. This effect is presumably caused by thermal stresses in the crystal which produce a voltage difference across the silvered surfaces. These units were originally constructed to serve as pressure transducers in a lowpressure...
متن کاملHot-wire polysilicon waveguides with low deposition temperature.
We fabricated and measured the optical loss of polysilicon waveguides deposited using hot-wire chemical vapor deposition at a temperature of 240°C. A polysilicon film 220 nm thick was deposited on top of a 2000 nm thick plasma-enhanced chemical vapor deposition silicon dioxide layer. The crystalline volume fraction of the polysilicon film was measured by Raman spectroscopy to be 91%. The optica...
متن کاملPrediction of Turbulent Temperature Fluctuations in Hot Jets
T diffusivity of temperature μ kinematic viscosity ρ density τij stress tensor subscripts a acoustic j jet ∞ freestream condition superscripts ′ fluctuating quantity time averaged quantity ˆ density weighted, time averaged quantity T turbulent
متن کاملResponse Time Evaluation of Constant Temperature Circuits
The evaluation of response time of a constant temperature thermoresistive sensor based feedback circuit, excited by a pulsewidth modulated (PWM) waveform is done by a way of simulation studies in PSPICE environment and compared with that of a circuit excited by an analog voltage (continuous time domain). For a thermoresistive sensor with an intrinsic time constant much larger than the period of...
متن کاملUsing the Finite Element Method to Determine the Temperature Distributions in Hot-wire Polystyrene Cutting
Hot-wire cutting is a common material removal process used to shape and sculpt plastic foam materials, such as expanded polystyrene (EPS). Due to the low cost and sculpt-ability of plastic foams they are popular materials for large sized (> 1 m3) prototypes and bespoke visual artefacts. Recent developments in robotic foam sculpting machines have greatly increased the ability of hot-tools to scu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME international journal
سال: 1987
ISSN: 0913-185X
DOI: 10.1299/jsme1987.30.1783