Frequency Selective Surface Coded Retroreflectors for Chipless Indoor Localization Tag Landmarks
نویسندگان
چکیده
منابع مشابه
Directly Printable Frequency Signatured Chipless RFID Tag for IoT Applications
This paper proposes a low-cost, compact, flexible passive chipless RFID tag that has been designed and analyzed. The tag is a bowtie-shaped resonator based structure with 36 slots; where each patch is loaded with 18 slots. The tag is set in a way that each slot in a patch corresponds to a metal gap in the other patch. Hence there is no mutual interference, and high data capacity of 36 bits is a...
متن کاملFully Printable Chipless RFID Tag
1.1 Radio frequency identification Radio frequency identification (RFID) is a wireless data capturing technique which utilizes radio frequency (RF) waves for automatic identification of objects. RFID relies on RF waves for data transmission between the data carrying device, called the RFID tag, and the interrogator (Finkenzeller, 2003; Kraiser & Steinhagen, 1995) A typical RFID system is shown ...
متن کاملReference Tag - based Indoor Localization Techniques ?
In WSN-based localization, there are many challenging points. The difficulty lies in the fact that communication signals in a space-limited indoor office environment are interfered and attenuated by multi-path, reflection, channel fading, deflection, diffraction, etc. In fact, it is quite difficult to develop a reliable signal propagation model in an office environment because it is challenging...
متن کاملEquivalent Circuit Model for Square Ring Slot Frequency Selective Surface
An equivalent circuit model for predicting the frequency response of a square ring slot frequency selective surface (SRS-FSS) for normal incidence is described. The proposed FSS consists of an array of square patches centered within a wire grid. The presented circuit model is formed by the impedance of the wire grid that is parallel with the impedance of the patch array, also the mutual couplin...
متن کاملRadar Cross Section Measurements of Frequency Selective Terahertz Retroreflectors
The radar cross section of spherical retroreflectors operating at terahertz frequencies is investigated. Several spherical retroreflectors with diameters ranging from 2 mm to 8 mm were fabricated and their radar cross section was measured at 100 GHz, 160 GHz, and 350 GHz. A frequency selective surface was applied to the retroreflectors to demonstrate proof of concept of narrow-band terahertz re...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Antennas and Wireless Propagation Letters
سال: 2020
ISSN: 1536-1225,1548-5757
DOI: 10.1109/lawp.2020.2975143