Friction and Temperature Behavior of Lubricated Thermoplastic Polymer Contacts

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Friction models for sliding dry, boundary and mixed lubricated contacts

Friction, lubrication, and wear have a strong influence on the performance and behavior of mechanical systems. This paper deals with different friction models for sliding contacts running under different conditions. The models presented are suited to different situations, depending on the type of contact, running conditions, and the behavior of interest. The models will be discussed from simula...

متن کامل

The effect of temperature on the nanoscale adhesion and friction behaviors of thermoplastic polymer films.

Adhesion and friction tests were carried out in order to investigate the effect of temperature on the tribological characteristics of poly(methylmethacrylate) (PMMA) film using AFM. The pull-off and friction forces on the PMMA film were measured under a high vacuum condition (below 1 × 10(-4) Pa) as the temperature of the PMMA film was increased from 300 to 420 K (heating) and decreased to 300 ...

متن کامل

Tribological behaviors of several polymer–polymer sliding combinations under dry friction and oil-lubricated conditions

The friction and wear properties of polyamide 66 (PA66), polyphenylene sulfide (PPS) and polytetrafluoroethylene (PTFE) sliding against hemselves under dry sliding and oil-lubricated conditions were studied by using a pin-on-disc tribometer. The effect of applied load and sliding peed on tribological behaviors of the polymer–polymer sliding combinations under dry sliding and oil-lubricated cond...

متن کامل

Static or breakloose friction for lubricated contacts: the role of surface roughness and dewetting.

We present experimental data for the static or breakloose friction for lubricated elastomer contacts, as a function of the time of stationary contact. Due to fluid squeeze-out from the asperity contact regions, the breakloose friction force increases continuously with the time of stationary contact. We consider three different cases: (a) PDMS rubber balls against flat smooth glass surfaces, (b)...

متن کامل

Influence of electric potentials on friction of sliding contacts lubricated by an ionic liquid.

Tribological investigations on the macroscopic scale revealed that friction can be influenced in situ by applying electric potentials, if electrically conductive fluid such as an ionic liquid is used as a lubricant. Enrichment of charged ions at a steel interface occurs by applying electric surface potentials in a three-electrode setup. As a consequence, the lubrication conditions change. It is...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Lubricants

سال: 2020

ISSN: 2075-4442

DOI: 10.3390/lubricants8060067