Friction Characteristics of Warm a Forging Lubricant Containing Nano Graphite Powder
نویسندگان
چکیده
منابع مشابه
Graphite and Hybrid Nanomaterials as Lubricant Additives
Lubricant additives, based on inorganic nanoparticles coated with organic outer layer, can reduce wear and increase load-carrying capacity of base oil remarkably, indicating the great potential of hybrid nanoparticles as anti-wear and extreme-pressure additives with excellent levels of performance. The organic part in the hybrid materials improves their flexibility and stability, while the inor...
متن کاملInvestigating the Performance Characteristics of Asphaltic Concrete Containing Nano-Silica
Using nano-technology materials in the asphalt pavement industry is new compared with Portland cement concrete. The main objective of this study is to investigate the effects of nano-silica modification on some properties of a penetration grade asphalt cement and a typical asphalt concrete. 60/70 penetration grade bitumen was modified with different percentages of nano-silica (i.e. 1, 3 and 5%,...
متن کاملExperimental Investigation of Metal Powder Compaction without Using Lubricant
The main objective of this work was to design a novel device for compaction of metal powders so that the green parts could be ejected with applying a negligible force and without the need for any lubricant in either an admixed form or applied to the die wall. For this purpose a 40 mm diameter one-piece die was envisaged which would elastically contracted 0.076 mm before compaction and after com...
متن کاملForging of Solid Powder Discs of Large Slenderness Ratio
The paper reports an investigation into the forging of solid powder circular disc with large slenderness ratio, between two flat dies. The deformation pattern during the operation is influenced by many factors, which interact with each other in a complex manner. The decisive factors are the interfacial conditions, initial relative density of the preform and the geometry of the preform. An attem...
متن کاملCryogenic friction behavior of PTFE based solid lubricant composites
Solid lubricants used in aerospace applications must provide low friction and a predictable operation life over an extreme range of temperatures, environments and contact conditions. PTFE and PTFE composites have shown favorable tribological performance as solid lubricants. This study evaluates the effect of temperature on the friction coefficient of neat PTFE, a PTFE/ PEEK composite and an exp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of Materials Processing
سال: 2012
ISSN: 1225-696X
DOI: 10.5228/kstp.2012.21.1.13