Frictional contact FE analysis in a railway wheel-rail contact
نویسندگان
چکیده
منابع مشابه
Analytical Approach to Vibration Analysis Of the Wheel-rail contact
Wheel/rail contact simulation is one of the most complicated problems in the modeling of railway vehicles. The wheel/rail interaction plays a unique role in rail vehicle dynamics. In this paper, the dynamic response of the wheel on irregular rail track is analyzed with analytical approach using the method of Multiple Scales (MMS). The Hertzian contact theory is used to obtain the relationshi...
متن کاملContact Force Estimation in the Railway Vehicle Wheel-Rail Interface
Increased patronage of railways in the UK in the past 20 years has put demands on rolling stock to operate at peak availability with reduced time available for maintenance. One possible tool to enable this is the use of real time fault detection and diagnosis on board railway vehicles to detect faulty components and provide information about the current running condition of the system. This pap...
متن کاملPreliminary results on dynamic analysis of a new test rig for wheel-rail contact studies
A new reduced–scale test rig is developed owing to significantly contribute to the applicability of the laboratory tests on rolling contact fatigue (RCF) in wheel-rail material. This paper introduces the dynamic analysis of the test rig, in order to assess the vibration behaviour of the system with respect to contact phenomenon. Finite element modelling (FEM) is used to simulate the mecha...
متن کاملFpga Implementation of Wheel-rail Contact Laws
This paper presents the development of an accelerator for the real-time simulation of wheelrail contact laws (Hertz and Fastsim), which would enable the use of hardware-in-the-loop for experimental studies of the latest active control technology for wheelset stabilization and steering. The complex wheel-rail contact laws are implemented using a single FPGA chip that outperforms modern general-p...
متن کاملAnalysis of Rail Ends under Wheel Contact Loading
The effect of the discontinuity of the rail ends and the presence of lower modulus insulation material at the gap to the variations of stresses in the insulated rail joint (IRJ) is presented. A three-dimensional wheel – rail contact model in the finite element framework is used for the analysis. It is shown that the maximum stress occurs in the subsurface of the railhead when the wheel contact ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Periodica Polytechnica Mechanical Engineering
سال: 2014
ISSN: 0324-6051,1587-379X
DOI: 10.3311/ppme.7229