Frictional Resistance of a Rotating Disc
نویسندگان
چکیده
منابع مشابه
Frictional torque on a rotating disc
Resistance to motion often includes a dry frictional term independent of the speed of an object and a fluid drag term varying linearly with speed in the viscous limit. (At higher speeds, quadratic drag can also occur.) Here, measurements are performed for an aluminium disc mounted on bearings that is given an initial twist and allowed to spin until it comes to a stop. It is found that a sum of ...
متن کاملSteady Thermal Stresses in a Thin Rotating Disc of Finitesimal Deformation with Mechanical Load
Seth’s transition theory is applied to the problems of thickness variation parameter in a thin rotating disc by finite deformation. Neither the yield criterion nor the associated flow rule is assumed here. The results obtained here are applicable to compressible materials. If the additional condition of incompressibility is imposed, then the expression for stresses corresponds to those arising ...
متن کاملNumerical Modeling of Disc Brake System in Frictional Contact
Safety aspect in automotive engineering has been considered as a number one priority in development of new vehicle. Each single system has been studied and developed in order to meet safety requirement. Instead of having air bag, good suspension systems, good handling and safe cornering, there is one most critical system in the vehicle which is brake systems. The objective of this work is to in...
متن کاملAdsorption and conversion of prothrombin on a rotating disc.
In most flow systems, the rate of protein transfer from bulk solution to a macroscopic surface is site-dependent. In studies on surface-mediated protein conversion, this hampers the comparison of a proposed expression for the conversion process, such as the Michaelis-Menten equation, which actually measured overall conversion rates. However, the rotating disc is a classical example of a uniform...
متن کاملFrictional Resistance of Antifouling Coating Systems
An experimental study has been made to compare the frictional resistance of several ship hull coatings in the unfouled, fouled, and cleaned conditions. Hydrodynamic tests were completed in a towing tank using a flat plate test fixture towed at a Reynolds number ~ReL! range of 2.8310 6 – 5.5310 based on the plate length and towing velocity. The results indicate little difference in frictional re...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1951
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.17.92