Fuel production using membrane reactors: a review

Progress in enzymatic membrane reactors – a review

The enzymatic membrane reactor (EMR) consists on a coupling of a membrane separation process with an enzymatic reaction. The selective membrane aims to separate the biocatalyst from the reaction products. The main objective of EMR is to ensure the complete rejection of the enzyme in order to maintain the full activity inside the reacting volume. Depending on the case, enzyme molecules may be fr...

Membrane reactors: A way to increase efficiency

Reverse Flow Catalytic Membrane Reactors for Energy Efficient Syngas Production

Natural gas is becoming an increasingly important energy source, due to the increasing energy demands and declining oil reserves, whereas large volumes of natural gas are still widely available at remote locations. In view of the existing infrastructure for liquid fuels, natural gas is most efficiently used in the transport sector by converting it to liquid fuels via the Gas-To-Liquid process. ...

PRODUCTION OF HYDROGEN EMPLOYING Ni-Rh CATALYSTS IN MEMBRANE REACTORS

−− Rh, Ni and Rh-Ni catalysts were prepared by wet impregnation of La2O3. The Rh content was modified but the Ni loading was kept constant at 2 wt%. The solids were calcined at 823 K in air flow and were reduced at 973 K in flowing hydrogen. The activity, stability, and residue formation during the CO2 reforming of CH4, of all the catalysts were tested in a fixed-bed reactor. Those with low car...

Poly (Ether Ether Ketone) Based Anion Exchange Membrane for Solid Alkaline Fuel Cell: A Review

Solid alkaline fuel cell is employed by polymer anion exchange membrane (AEM) that is permeable to hydroxide ion. A number of polymers have been proposed for AEM which include polysulfone (PSF), poly (phenylene oxide) (PPO), and poly (ether ether ketone) (PEEK). The purpose of this paper was to conduct a critical review on the development of PEEK polymer as AEM, particu...