Fuel Rod Scanner for Reactor Power Density Distribution Measurement

Determining axial fuel-rod power-density profiles from in-core neutron flux measurements

A method is proposed for determining power-density profiles in nuclear reactor fuel rods from neutron flux measurements obtained by multiple in-core micropocket fission detectors (MPFD). A general formulation is presented that relates the power-density profiles in a reactor’s fuel rods to the flux density at detector locations. Key to this formulation is the construction of an appropriate respo...

Measurement of Granule Density in UASB Reactor

To monitor the granularity of anaerobic sludge, the determination of granule density is vital importance. Granular sludge is the key factor for the efficient operation of upflow anaerobic sludge blanket (UASB) reactor. For this reason several techniques have been proposed. In the proposed algorithm, the granular density was calculated. The granular density was strongly correlated with the VSS/T...

The Design of High Power Density Annular Fuel for LWRs

Fuel performance models have been developed to assess the performance of internally and externally cooled LWR annular fuel. Such fuel may be operated at 30-50% higher core power density than the current operating LWRs, and to a burnup of 80-100MWd/kgU. The models are used to optimize the fuel design so that it is able to achieve high power density and high burnup, and to identify the features o...

Determination ofresearch reactor fuel burnup

Modeling the measurement of VVER-1000 reactor power by neutron and gamma radiation with MCNP code

The present study deals with a new method for measuring the power of a reactor. This method uses gamma and neutron radiation resulted from the entire reactor structure, without changing its structure (online). In terms of functionality, this method can measure the reactor power in real-time and report it instantly. In order to obtain the relationship between reactor power and gamma and neutron ...