Full-scale testing of stiffened extended shear tab connections under combined axial and shear forces
نویسندگان
چکیده
منابع مشابه
Non-Linear Behavior and Shear Strength of Diagonally Stiffened Steel Plate Shear Walls
In this study, non-linear behavior of diagonally stiffened steel plate shear walls as a seismic resisting system has been investigated, and theoretical formulas for estimating shear strength capacity of the system have been proposed. Several validated analytical finite element models of steel shear walls with various stiffener dimensions are generated to verify and compare the analytical and th...
متن کاملBuckling of rectangular and hexagonal honeycomb under combined axial compression and transverse shear
Article history: Received 26 February 2013 Received in revised form 19 July 2013 Available online 17 August 2013 Dedicated to Prof. S. Kyriakides on the occasion of his 60th birthday.
متن کاملDesign of Unstiffened Extended Single-Plate Shear Connections
Extended single-plate shear connections (Figure 1) offer many advantages that simplify the construction process. Because the connection to the supported member is moved clear of the support, coping of the supported member is not required and the only fabrication process required for the supported member is drilling or punching. Also, because bolted connections are only used in the connection to...
متن کاملDynamic Enhancement and Multi-axial Behavior of Honeycombs under Combined Shear- Compression Doctoral Committee
III Abstract: This study aims at the energy absorption problems in the crash of high speed vehicles, bird impact and crashworthiness design of aircraft, and the dynamic enhancement and multi-axial behavior of honeycombs under combined shearcompression are investigated. The study consists mainly of two parts. The first part is related to the dynamic strength enhancement of honeycombs under uniax...
متن کاملBehavior of Full-Scale Shear Deficient Corner RC Beam- Column Connections Retrofitted with CFRP Sheets
In moment resisting reinforced concrete framed buildings, corner joints are found at the roof level. These joints, if designed for gravity loads and are based on pre-seismic codes, may suffer substantial damage during earthquakes particularly under opening cycles, i.e. those causing flexural tension on the inside of the joint. Several techniques of repair and strengthening of reinforced concret...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Structures
سال: 2019
ISSN: 0141-0296
DOI: 10.1016/j.engstruct.2019.01.125