Fully-Enclosed Ceramic Micro-burners Using Fugitive Phase and Powder-based Processing
نویسندگان
چکیده
منابع مشابه
Fully-Enclosed Ceramic Micro-burners Using Fugitive Phase and Powder-based Processing
Ceramic-based microchemical systems (μCSs) are more suitable for operation under harsh environments such as high temperature and corrosive reactants compared to the more conventional μCS materials such as silicon and polymers. With the recent renewed interests in chemical manufacturing and process intensification, simple, inexpensive, and reliable ceramic manufacturing technologies are needed. ...
متن کاملMicro-powder injection molding: Investigation of powder-binder separation using synchrotron-based micro-tomography and 3D image analysis
Micro-powder injection molding (μ-PIM) is one of the most promising processes of mass production for the fabrication of small complexly shaped ceramic or metallic parts with high sintered density. However, dimensional accuracy of finished parts is difficult to achieve because of extremely high shear rates during the injection molding process. This promotes the separation of powder and binder ev...
متن کاملRheology of Ceramic-powder-filled Polymer Melts
Ceramic powder (zirconia) was mixed with binder consisting polypropylene, paraffin and stearic acid in elastic extruder. Steady and oscillatory shear flow properties of these materials in the molten state were measured on a cone-plate rheometer; parallel superposed steady and oscillatory shear flow experiments were also carried out. Moreover, flow properties at high shear rates were measured on...
متن کاملDetermination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods
The aim of this research is to investigate different X-ray based quantitative phase analysis methods for determination of cristobalite phase content in ceramic cores. For this purpose, four popular routes including peak absolute intensity method, relative intensity ratio method, direct or calibration method and internal standard (or Alexander-Klug) method have been chosen. Some control samples ...
متن کاملSolid Freeform Fabrication Based on Micro-Plasma Powder Deposition
This paper presents a solid freeform fabrication (SFF) technique based on micro-plasma powder deposition (MPPD). The relationship between the geometric features of the deposited layers and the welding parameters is investigated. The arc length is controlled through the monitoring of the arc voltage. The result of building parts with functionally graded components by the MPPD process is shown as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Reports
سال: 2016
ISSN: 2045-2322
DOI: 10.1038/srep31336