Function-oriented defect assessment in hybrid sheet molding compound tensile specimen using surrogate models

Dynamic tensile test and specimen design of auto-body steel sheet at the intermediate strain rate

In this paper, the tensile testing method at the intermediate strain rate is established and tensile tests of steel sheets for an auto-body have been performed to evaluate dynamic material properties. A high speed tensile testing machine has been developed for tensile tests at the intermediate strain rate. A simple jig fixture for gripping a specimen has been designed to diminish the load ringi...

Characterizing the Mechanical Properties of Callaways Forged Carbon Fiber Reinforced Sheet Molding Compound

Volumetrical Characterization of Sheet Molding Compounds

For a comprehensive study of Sheet Molding Compound (SMC) surfaces, topographical data obtained by chromatic confocal imaging were submitted systematically for the development of a profile model to understand the formation of cavities on the surface. In order to qualify SMC surfaces and to predict their coatability, a characterization of cavities is applied. To quantify the effect of surface mo...

Improved specimen recovery in tensile split Hopkinson bar.

This paper presents an improved specimen recovery method for the tensile split Hopkinson bar (TSHB) technique. The method is based on the trapping of residual stress waves with the use of momentum trap bars. As is well known, successful momentum trapping in TSHB is highly sensitive to experimental uncertainties, especially on the incident bar side of the set-up. However, as is demonstrated in t...

Thermomechanical Studies in Glass/Epoxy Composite Specimen during Tensile Loading

This paper presents the results of thermo-mechanical characterization of Glass/Epoxy composite specimens using Infrared Thermography technique. The specimens used for the study were fabricated in-house with three different lay-up sequences and tested on a servo hydraulic machine under uni-axial loading. Infrared Camera was used for on-line monitoring surface temperature changes of composite spe...