Functionally Graded Al Foam Fabricated by Sintering and Dissolution Process with Remaining Spacers
نویسندگان
چکیده
منابع مشابه
Pore Formation Process of Porous Ti3SiC2 Fabricated by Reactive Sintering
Porous Ti3SiC2 was fabricated with high purity, 99.4 vol %, through reactive sintering of titanium hydride (TiH2), silicon (Si) and graphite (C) elemental powders. The reaction procedures and the pore structure evolution during the sintering process were systematically studied by X-ray diffraction (XRD) and scanning electron microscope (SEM). Our results show that the formation of Ti3SiC2 from ...
متن کاملOptimal sintering procedure to fabrication of functionally graded Hydroxyapatite-
Functionally graded metal-ceramic composite was fabricated by pressure-less sintering. The pure metallic component (Ti) and the pure ceramic component (HA) were located at the ends of a cylindrical specimen. Titanium and-Hydroxyapatite were utilized as a metallic and ceramic layer. The target sample thickness was 6 mm with radius cylindrical 20 mm. The sample was made from the cylindrical type ...
متن کاملFabrication of Net-Shape Functionally Graded Composites by Electrophoretic Deposition and Sintering: Modeling and Experimentation
It is shown that electrophoretic deposition (EPD) sintering is a technological sequence that is capable of producing net-shape bulk functionally graded materials (FGM). By controlling the shape of the deposition electrode, components of complex shapes can be obtained. To enable sintering net-shape capabilities, a novel optimization algorithm and procedure for the fabrication of net-shape functi...
متن کاملAnalysis of sandwich TPS panel with functionally graded foam core by Galerkin method
The method of Fourier analysis is combined with the Galerkin method for solving the two-dimensional elasticity equations for a sandwich thermal protection system (TPS) insulation panel with foam core subjected to transverse loads. The variation of the Young s modulus through the thickness is given by a polynomial in the thickness coordinate and the Poisson s ratio is assumed to be constant. The...
متن کاملDeformation and Plateau Region of Functionally Graded Aluminum Foam by Amount Combinations of Added Blowing Agent
Recently, to further improve the performance of aluminum foam, functionally graded (FG) aluminum foams, whose pore structure varies with their position, have been developed. In this study, three types of FG aluminum foam of aluminum alloy die casting ADC12 with combinations of two different amounts of added blowing agent titanium(II) hydride (TiH₂) powder were fabricated by a friction stir weld...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2016
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.m2015404