Fundamental period and damping of experimentally tested reinforced-concrete building under different damage levels

Damage Detection of Carbon Fiber-reinforced Concrete Under Bending Test

Seismic Damage Analysis of Reinforced Concrete Building Considering Member Fracture

The Adaptively Shifted Integration (ASI) technique, which produces the highest computational efficiency in the finite element analyses of framed structures including static and dynamic collapse problems, is applied to the seismic damage analysis of a reinforced concrete building. By expressing member fracture by a plastic hinge located at the exact position with a simultaneous release of result...

an investigation of accuracy and complexity across different proficiency levels in written narrative task

abstract this quasi-experimental study was aimed at examining the impact of storyline complexity on the grammatical accuracy and complexity of advanced and intermediate efl learners. a total of 65 advanced and intermediate efl learners were selected from iran language institute (ili). an intact group including 35 intermediate participants and another intact group with 30 advanced participants ...

Damage Assessment of Reinforced Concrete Buildings Considering Irregularities (RESEARCH NOTE)

Structural damage can be controlled in performance based seismic design (PBSD) according to the requirement under a certain hazard level. During strong ground motion (GM) such buildings suffer minor to major damages depending on the shaking level of GM. The available damage assessment methods are complex, tedious and time-consuming procedure. In the present study, a simplified empirical model h...

Nonlinear Damping Identification in Precast Prestressed Reinforced Concrete Beams

This article presents a damage detection method for prestressed reinforced concrete (PRC) elements based on free vibration tests and nonlinear damping identification. Integrated static and dynamic experiments were carried out on three precast PRC beam specimens. The static loading induced different levels of damage to the beams. At each damage level, impulsive loading was applied to the beams a...