Fundamental Study on Anti-corrosive Method with Sacrificial Anode for Steel Members using Al-Zn Alloy Casting Plate and Fiber Sheet in Atmospheric Environment
نویسندگان
چکیده
منابع مشابه
Influence of Casting Temperature on Electrochemical Behavior of Al-Zn-In Sacrificial Anodes
Aluminum anodes have been widely used in the cathodic protection of marine structures. However there are conditions in which these anodes become passivated or face some localized or unwanted corrosion, which influences their efficiency. Addition of alloying elements such as Zn and In not only have improved the efficiency of the anodes but also the effect of casting parameters such as ultra ...
متن کاملinfluence of casting temperature on electrochemical behavior of al-zn-in sacrificial anodes
aluminum anodes have been widely used in the cathodic protection of marine structures. however there are conditions in which these anodes become passivated or face some localized or unwanted corrosion, which influences their efficiency. addition of alloying elements such as zn and in not only have improved the efficiency of the anodes but also the effect of casting parameters such as ultra melt...
متن کاملImproving of Microstructure and Mechanical Properties of Al-A356 Alloy with Compo-Casting Method
Aluminum/alumina composites are used in automotive and aerospace industries due to their low density and good mechanical strength. In this research, the effect of mechanical stirring of slurry in liquid-solid phase temperature and injection of alumina powder with inert gas (Ar) on microstructure and mechanical properties of Al-A356 alloy is investigated. In order to improve of the wettability a...
متن کاملAnti-corrosive Properties of CeO2 Conversion Coatings on Aluminum Alloy 2024 Prepared by Dip Immersion Method
As an alternative to chromate conversion coatings, rare-earth coatings especially cerium, because of the low toxicity, have attracted considerable attention. Using dip immersion method, cerium-based conversion coating was deposited on aluminum 2024. Corrosion resistance was studied in 3.5 wt.% NaCl solution using potentiodynamic polarization, electrochemical impedance spectroscopy, and surface ...
متن کاملStudy on Mg/Al Weld Seam Based on Zn–Mg–Al Ternary Alloy
Based on the idea of alloying welding seams, a series of Zn-xAl filler metals was calculated and designed for joining Mg/Al dissimilar metals by gas tungsten arc (GTA) welding. An infrared thermography system was used to measure the temperature of the welding pool during the welding process to investigate the solidification process. It was found that the mechanical properties of the welded join...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Zairyo-to-Kankyo
سال: 2016
ISSN: 0917-0480,1881-9664
DOI: 10.3323/jcorr.65.390