Fundamental study on underwater gas cutting. Report 1. Underwater gas cutting phenomena in flat position.
نویسندگان
چکیده
منابع مشابه
Hydrogen Gas Cutting System
Recently, the introduction of advanced “Hydrogen Gas Cutting” was investigated but finally abandoned due to the problems of several accidents occurred, cost merit and safety. The facility is called “Hydrogen-Oxygen Mixture Gas Generation System” and stores the hydrogen detonating gas (when hydrogen and oxygen are mixed to 2:1 in volume ratio, the mixture gas violently explodes if ignited), so t...
متن کاملExperimental Investigation on Gas Laser Cutting
Laser beam cutting (LBC) is a most predominantly used non-traditional cutting process to cut desired shapes out of sheet metals, plates, sections and boxes with greater accuracy at least time. The criticality in this process is its complexity in cutting non ferrous materials due to their lesser absorption rate of the laser beam. Continuous wave CO2 laser and pulsed Nd:YAG laser are the most com...
متن کاملDevelopment of a Water-Jet Assisted Underwater Laser Cutting Process
We present the development of a new underwater laser cutting process in which a water-jet has been used along with the laser beam to remove the molten material through kerf. The conventional underwater laser cutting usually utilizes a high pressure gas jet along with laser beam to create a dry condition in the cutting zone and also to eject out the molten material. This causes a lot of gas bubb...
متن کاملTreatment of Wastewater by Underwater Discharge in Gas Bubbling Water
This paper describe the high-voltage pulsed discharge generated in water with different types of bubbling gases as well as no gas in a reactor with a point-mesh electrode configuration. The pulsed discharges are a promising technique in environmental remediation to treatment of wastewater. Acid orange 7organic dye solution was treated as a common wastewater sample to elucidate chemical efficien...
متن کاملExperimental and Numerical Pore Scale Study of Residual Gas Saturation in Water/Gas Imbibition Phenomena
Residual gas saturation is one of the most important parameter in determining recovery factor of water-drive gas reservoir. Visual observation of processes occurring at the pore level in micromodels can give an insight to fluid displacements at the larger scale and also help the interpretation of production performance at reservoir scale. In this study experimental tests in a glass micromod...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 1987
ISSN: 0288-4771
DOI: 10.2207/qjjws.5.219