Gas Dynamic Air Distribution for Post-Reaction Gas Afterburning in a Metallurgical Furnace
نویسندگان
چکیده
In the paper, course of post-reaction gas afterburning generated during metallurgical process where reduction metal and semi-metal oxides is performed with use carbon presented. Process waste gases can be an alternative source energy to used in same or converted another. The participation chemical enthalpy total stream 93 %, rest physical enthalpy. study, particular attention was paid proper mixing fuel oxidizer maintaining appropriate ratio excess combustion air λ a . dynamics processes calculated according several popular models but best results were obtained using two-step mechanism reaction constants Westbrook-Dryer.
منابع مشابه
A New Model for Designing Gas Distribution Networks
A new model for the design of the city gas distribution network has been presented. On the basis of mass flow rates and pressure balances a nonlinear system of equation is obtained. A method for solving the latter is outlined which gives accurate results. Also, this method, when compared to the other accessible ones, takes less computer time. Finally in this method the actual length of netw...
متن کاملDynamic Model For Production of Biohydrogen Via Water- Gas Shift Reaction (RESEARCH NOTE)
In design of anaerobic bioreactor, rate equation is commonly used. Mathematical model was developed at steady state condition, to project concentration of gaseous substrate and product in biological oxidation of carbon monoxide with water to produce hydrogen and carbon dioxide. The concept of bioconversion was based on transport of CO from gas phase to liquid phase, as the CO consumption was in...
متن کاملSingle walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction
In this paper, the effect of surface area of reaction layers in gas diffusion electrodes on oxygen reduction reaction was investigated. For this purpose, various amounts (0.1, 0.2, 0.3, 0.4, 0.5, 1, 1.5 and zero %wt of total loading of reaction layer) of single walled carbon nanotube (SWCNT) were inserted in the reaction layer. The performance of gas diffusion electrodes for oxygen reduction re...
متن کاملOptimization the Efficiency of Gas Turbines for Air Pollution Reduction
Increasing concerns about energy and emissions from fuel consumption in gas turbines has attracted many researchers to protect the environment and reduce pollutants in the world. The main objective of this paper is to investigate the increasing efficiency of three-stroke gas turbine operation based on the technical analysis of the operation of three-axis gas turbine cycles with non-design condi...
متن کاملEffects of Furnace and Inlet Gas Mixture Temperature on Growing Carbon Nanotube in a CVD Reactor
Carbon nanotubes (CNTs), nowadays, are one of the important nanomaterials that can be produce with different methods such as chemical vapor deposition (CVD). Growing of CNTs via CVD method can be influenced by several operating parameters that can affect their quality and quantity. In this article, the effects of inlet gas mixture temperature on CNT’s local growth rate, total production, and le...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC web of conferences
سال: 2022
ISSN: ['2261-236X', '2274-7214']
DOI: https://doi.org/10.1051/matecconf/202236903001