Gas Sensing Characteristics of WO3-Doped SnO2Thin Films Prepared by Solution Deposition Method
نویسندگان
چکیده
منابع مشابه
DMMP Sensing Performance of Undoped and Al Doped Nanocrystalline ZnO Thin Films Prepared by Ultrasonic Atomization and Pyrolysis Method
Highly textured undoped (pure) and Al doped ZnO nanocrystalline thin films prepared by ultrasonic atomization and pyrolysis method are reported in this paper. ZnCl2 water solution was converted into fine mist by ultrasonic atomizer (Gapusol 9001 RBI Meylan, France). The mist was pyrolyzed on the glass substrates in horizontal quartz reactor placed in furnace. The Structural and microstructural ...
متن کاملSelective detection of naphthalene with nanostructured WO3 gas sensors prepared by pulsed laser deposition
Pulsed laser deposition (PLD) at room temperature with a nanosecond laser was used to prepare WO3 layers on both MEMS microheater platforms and Si/SiO2 substrates. Structural characterization showed that the layers are formed of nanoparticles and nanoparticle agglomerates. Two types of layers were prepared, one at an oxygen partial pressure of 0.08 mbar and one at 0.2 mbar. The layer structure ...
متن کاملSurface Morphology and Sensing Property of NiO-WO3 Thin Films Prepared by Thermal Evaporation
WO3 and NiO-WO3 thin films of various thicknesses were deposited on an Al2O3-Si (alumina-silicon) substrate using high vacuum thermal evaporation. After annealing at 500C for 30 minutes in air, the crystallanity and surface morphology of WO3 and NiO-WO3 thin films were investigated using X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). It is observed that the WO3 thin films were ...
متن کاملEnhanced methanol sensing performance of oblique deposited WO3 thin films
Methanol (CH3OH) is a colorless liquid with a mild odor. The wide ranges of applications, toxicity and clinical implications of methanol have made necessary to develop reliable and high-performance methanol sensors. In this paper, WO3 thin films were deposited on SiO2/Si substrates by e-beam evaporation technique under normal and oblique angles and then post-annealed at 500 °C with a flow of ox...
متن کاملCobalt or Silver Doped WO3 Nanowires Deposited by a Two-Step AACVD for Gas Sensing Applications
A two-step procedure was implemented to obtain tungsten oxide nanowires (WO3) doped with cobalt or silver oxide nanoparticles from metal-organic precursors, W(CO)6, Co(acac)2 and Ag(acac)2. In the first step, nanowires were grown at 400 °C using an aerosol assisted chemical vapor deposition system (AA-CVD) and subsequently annealed at 500 °C for 2 h. In the second step, metal loading (at differ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Korean Journal of Materials Research
سال: 2008
ISSN: 1225-0562
DOI: 10.3740/mrsk.2008.18.4.193