Gating system design for the space device case using T-Flex CAD

CAD system using case - based information

metrics for the detection of changed buildings in 3d old vector maps using als data (case study: isfahan city)

هدف از این تحقیق، ارزیابی و بهبود متریک های موجود جهت تایید صحت نقشه های قدیمی سه بعدی برداری با استفاده از ابر نقطه حاصل از لیزر اسکن جدید شهر اصفهان می باشد . بنابراین ابر نقطه حاصل از لیزر اسکنر با چگالی حدودا سه نقطه در هر متر مربع جهت شناسایی عوارض تغییر کرده در نقشه های قدیمی سه بعدی استفاده شده است. تمرکز ما در این تحقیق بر روی ساختمان به عنوان یکی از اصلی ترین عارضه های شهری می باشد. من...

Investigating a Design Space for Multi-Device Environments Investigating a Design Space for Multi-Device Environments

There has been significant research interest over recent years in the use of public digital displays and in particular their capability to offer both interactivity and personalized content. While a number of interaction technologies have been investigated, a promising approach has been the use of the ubiquitous cell phone which not only offers a means to interact with displays, but increasingly...

Obstacles to Using CAD Tools for Embedded System Design: an automotive case study

Historically, Computer Aided Design (CAD) research for digital electronics design has emphasized support for the largest and most technically difficult projects. However, the success of many embedded system design efforts depends more on system-level and lifecycle cost optimization than on an ability to synthesize hardware containing millions of transistors. Thus, existing CAD tools may not off...

Design Space Exploration using T&D-Bench

This paper presents T&D-Bench Teaching and Design Workbench, a software infrastructure for modeling and simulation of state-of-the-art processors. It combines features that simplify and accelerate the processor design process without restricting the designer possibilities, thus representing a good tradeoff for educational and research purposes that is not found in other environments. In T&D-Ben...