Gear shift simulation by using virtual prototype
نویسندگان
چکیده
منابع مشابه
Accelerated Logic Simulation by Using Prototype Boards
Simulation plays the most important role for the verification of digital circuits. Designers demand more and more speed for their simulation processes. Therefore, we have worked out an approach to accelerate logic simulation by using prototype boards. We developed a novel simulator/hardware interface to achieve a significant speed-up. A speed-up of about 100 was obtained in several cases. The b...
متن کاملVirtual prototype and experimental research on gear multi-fault diagnosis using wavelet-autoregressive model and principal component analysis method
Keywords: Gear fault diagnosis Virtual prototype Wavelet AR model PCA a b s t r a c t Gear systems are an essential element widely used in a variety of industrial applications. Since approximately 80% of the breakdowns in transmission machinery are caused by gear failure, the efficiency of early fault detection and accurate fault diagnosis are therefore critical to normal machinery operations. ...
متن کاملVirtual Prototype Modeling and Simulation of Pipe Wagon Articulating System
Virtual prototype of pipe wagon articulating (PWA) system has been developed and simulated based on the kinematics and dynamics of machinery and Automatic Dynamic Analysis of Mechanical Systems (ADAMS) software. It has been integrated with real-time three dimensional (3-D) system simulations for detailed and responsive interaction with dynamic virtual environments. By using this virtual model, ...
متن کاملModeling and Simulation of Simplified Aid for EVA Rescue Using Virtual Prototype Technology
The Simplified Aid for EVA Rescue (SAFER) System uses 24 GN2 thrusters to achieve six degree-of freedom maneuvering control and Automated Attitude Hold (AAH) control. It is a typical hybrid control system and difficult to model. In this article, we applied the virtual prototyping technology; and used MATLAB/Simmechanics for modeling and simulation of the SAFER system. The implementation model o...
متن کاملGear skiving - CAD simulation approach
Gear skiving is used as a gear finishing process to reduce distortion errors which occurred on the gears due to the heat treatment. This process is similar to gear hobbing but the difference is that the cutting tool has a negative rake angle and tooth rake offset. The present study simulates the kinematics of the cutting process with the aid of commercial CAD software and allows the precise det...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Vibroengineering PROCEDIA
سال: 2019
ISSN: 2345-0533,2538-8479
DOI: 10.21595/vp.2019.21160