Gear tooth rooth stress and fillet radii dependence

Spur Gear Tooth Stress Analysis And Stress Reduction

Gears are commonly used for transmitting power. They develop high stress concentration at the root and the point of contact. The repeated stressing on the fillets causes the fatigue failure of gear tooth. The main objective of this study is to add different shaped holes to reduce stress concentration. A finite element model of Spur gear with a segment of three teeth is considered for analysis a...

Differential Diagnosis of Spall versus Cracks in the Gear Tooth Fillet Region

This paper presents a technique to differentially diagnose two localized gear tooth faults: a spall and a crack in the gear tooth fillet region. These faults could have very different prognoses, but existing diagnostic techniques only indicate the presence of local tooth faults without being able to differentiate between a spall and a crack. The effects of spalls and cracks on the behavior/resp...

A Finite Element Stress Analysis of Spur Gears including Fillet Radii and Rim Thickness Effects

Optimal Modifications of Gear Tooth Surfaces

62 Management Summary In this paper a new method for the introduction of optimal modifications into gear tooth surfaces—based on the optimal corrections of the profile and diameter of the head cutter, and optimal variation of machine tool settings for pinion and gear finishing—is presented. The goal of these tooth modifications is the achievement of a more favorable load distribution and reduce...

On tribological design in gear tooth contacts

The correct tribological design will have a considerable effect on a gear’s service life and efficiency. The purpose of this thesis is to clarify the impact of variation in the gear tooth flank tribological system on the gear contact load capacity – to increase the understanding of how surface topography and lubricant interact. In this thesis the variation in surface topography inherent in the ...