Gearbox Noise and Vibration Prediction and Control
نویسندگان
چکیده
منابع مشابه
Gearbox Noise and Vibration Prediction and Control
This paper will review practical techniques and procedures employed to quiet gearboxes and transmission units. The author prefers solving the gear noise problem at the very source to introduce an enclosure as a means to reduce radiated noise, which seems to be easy but its effect on the sound pressure level is small. The gearbox noise problem solution is focused on the improvement of gear desig...
متن کاملExperimental Analyses of Vibration and Noise of Faulted Planetary Gearbox
ABSTRACT Epicyclic gear trains are widely used in various industrial sectors due to their advantages over fixed-axis gears, such as high torque capability, compact size, differential and planetary designs, ease of adjusting gear ratios and even directions of rotation. This research focuses on planetary gearbox whose degree of freedom is one. The geometry and dynamics of the planetary gear train...
متن کاملRail System Noise and Vibration Control
Control of noise and vibration emitted by steel wheel and rail transportation systems has a long history of designs and techniques, some of which were dismal failures and some which worked very well. Many of the early efforts had a valid technical base for the design, however, there were also many based on intuition or ideas with great expectations, but which had no real technical basis. In the...
متن کاملDesign of active bearings for gearbox noise control
The idea behind Active Structural Acoustic Control (ASAC) is to actively influence the dynamics of a structure to reduce the radiated sound. In ASAC, the difficulty often lies in finding the relation between the structural vibration and the sound pressure in a certain point. The largest reduction in sound pressure level is not always obtained by reducing the vibration levels of one panel, inter...
متن کاملRotorcraft Vibration and Noise Prediction Using a Unified Aeroelastic Analysis
A study of the combined helicopter noise and vibration problem was conducted. A refined aerodynamic model capable of calculating the unsteady surface pressure distribution on rotor blade/flap combinations is developed and coupled with an aeroelastic analysis simulation code. An acoustic prediction tool based on WOPWOP is combined with the aeroelastic analysis based on a flexible blade with coup...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Journal of Acoustics and Vibration
سال: 2009
ISSN: 2415-1408
DOI: 10.20855/ijav.2009.14.2242