Generalized Liquid-Based Damping Device for Passive Vibration Control

Genetic Algorithm Based Design Of Passive Elements For Vibration Control

Vibration Control of Cantilever Beam Based on Eddy Current Damping

A great difficulty is faced in the design of such structures due to the fact that the reduction in weight results in low rigidity and reduced vibration characteristics. Apart from the vibration is effectively controlled; it may destabilize the system and may, very often, result in complete failure of the system. Several advanced applications, such as those in jet fighters, automobiles and space...

performance evaluation of viscoelastic and friction passive damping systems in vibration control of tall buildings

this paper provides a comparison of the maximum inter-story drifts and tip acceleration of both a 16 and 30 stories building each with different structural systems; hybrid r.c moment frame with shear walls and hybrid steel frame with shear walls and x bracing which are equipped by passive dampers. each of the building models were analyzed as fully non-linear structures for variety of dampers pl...

Robot Vibration Control Using Inertial Damping Forces

High Damping Capacity Coatings for Surface Vibration Control

The damping capacity Q-'of a number of Fe-16%Cr alloys containing (0 6)%A1 and (0 4)%Mo has been investigated and compared to that of thermally sprayed coatings. The magnetomechanical hysteresis loss was determined using a cantilever method and based on the modal analysis technique of flat beam samples. Heat treatments usually enhanced the loss capability, but further annealing destroyed it dra...