Generation of Color Images by Utilizing a Single Composite Diffractive Optical Element
نویسندگان
چکیده
منابع مشابه
Simultaneous multicolor image formation with a single diffractive optical element.
A design for a novel diffractive optical element (DOE) that can reconstruct three different intensity patterns when it is illuminated by three different wavelengths is presented. If the chosen wavelengths are red, green, and blue, full-color reconstruction capability is obtained. Reconstruction is achieved in the near field (Fresnel domain). Computer simulation results as well as experimental e...
متن کاملGeneration of optical vector beams with a diffractive optical element interferometer.
We present a novel approach to generating radially and azimuthally polarized vector beams that utilize an interferometer constructed from two identical diffractive optical elements. The measured polarization properties of four vector beam states and their phase relationships are in good agreement with theoretical expectations. This interferometer is passively phase stable and robust, making it ...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولHolographically formed three-dimensional Penrose-type photonic quasicrystal through a lab-made single diffractive optical element.
Large-area three-dimensional Penrose-type photonic quasicrystals are fabricated through a holographic lithography method using a lab-made diffractive optical element and a single laser exposure. The diffractive optical element consists of five polymer gratings symmetrically orientated around a central opening. The fabricated Penrose-type photonic quasicrystal shows ten-fold rotational symmetry....
متن کاملFabrication of the Crystalline ITO Pattern by Picosecond Laser with a Diffractive Optical Element
This study presents the fabrication of crystalline indium tin oxide (c-ITO) patterns on glass substrate using laser-induced crystallization followed by chemical etching. In the proposed approach, an amorphous ITO (a-ITO) thin film was transformed into a c-ITO structure over a predetermined area using infrared picosecond fiber laser irradiation with a 500 kHz repetition rate, under a single lase...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Micromachines
سال: 2018
ISSN: 2072-666X
DOI: 10.3390/mi9100508