Generic magnetic fusion reactor cost assessment
نویسندگان
چکیده
منابع مشابه
The First Fusion Reactor: Iter
28 I n practical terms, the project’s goal is to construct and operate a tokamak experiment which can confine a deuterium-tritium plasma in which the α-particle heating dominates all other forms of plasma heating. Formally, the primary mission of the ITER project is to demonstrate sustainment of a DT plasma producing ~500 MW of fusion power for durations of 300 500 s with a ratio of fusion outp...
متن کاملAvalanche Boron Fusion by Laser Picosecond Block Ignition with Magnetic Trapping for Clean and Economic Reactor
Measured highly elevated gains of proton-boron (HB11) fusion [1] confirmed the exceptional avalanche reaction process [2][3] for combination the non-thermal block ignition using ultrahigh intensity laser pulses of picoseconds duration. The ultrahigh acceleration above 10 20 cm/s 2 for plasma blocks was theoretically and numerically predicted since 1978 [4] and in measured [5] exact agreement [6...
متن کاملBi-Directional Hydrogen Isotopes Permeation through the First Wall of a Magnetic Fusion Power Reactor
Plasma-driven permeation (PDP) and gas-driven permeation (GDP) through a first wall candidate material F82H have been investigated using a laboratory-scale steady state plasma facility. Experiments indicate that GDP may take place in the opposite direction of PDP, which then results in an unwanted increase in edge plasma density. A hydrogen flow from the plasma side to the gas side has also bee...
متن کاملConferences and Symposia Fusion Reactor Design Iv
The International Atomic Energy Agency convened, in the framework of its Fusion Technology and Engineering Programme, the 4th Technical Committee and Workshop on Fusion Reactor Design and Technology at Yalta, USSR, from 26 May — 6 June 1986. This report contains all summaries of sessions that were organized during the workshop. The papers presented at the meeting are being published by the Agen...
متن کاملConcept of Multi-function Fusion Reactor
To really use the fusion energy and make the fusion energy as a main energy in the world could need more than 50 years. The construction of ITER starts the real course to realize the peaceful use of the fusion energy. It means the technologies developed in the world are feasible to built fusion facilities or reactors with fusion core plasmas. Based on the technologies nowadays, a concept of mul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Fusion Energy
سال: 1985
ISSN: 0164-0313,1572-9591
DOI: 10.1007/bf01050292