Geoelectrical survey and cone penetration test data for groundwater potential determination around Gatot Subroto Street, Banjarmasin
نویسندگان
چکیده
منابع مشابه
A Method for Predicting Pile Capacity Using Cone Penetration Test Data
The massive construction in poor lands has encouraged engineers to use deep foundations in order to transfer superstructure loads to the subsoil. Since soil excavation, sampling, and laboratory testing as a part of site investigation are relatively difficult, in-situ tests such as cone penetration test (CPT) as a very informative test may be recommended. The CPT has been widely used in engineer...
متن کاملGroundwater potential zone identification using geoelectrical survey: A case study from Medak district, Andhra Pradesh, India
A Geoelectrical resistivity survey using Vertical Electrical Soundings (VES) was carried out in Medak District, Andhra Pradesh, India, in order to assess the subsurface geology and groundwater potential zones. Twenty six vertical electrical soundings were recorded with Schlumberger electrode configuration with current electrode spacing (AB/2) half ranging from 1 to 150m. The field data has been...
متن کاملGeoelectrical evidence of bicontinuum transport in groundwater
[1] Bicontinuum models and rate-limited mass transfer (RLMT) explain complex transport behavior (e.g., long tailing and rebound) in heterogeneous geologic media, but experimental verification is problematic because geochemical samples represent the mobile component of the pore space. Here, we present geophysical evidence of RLMT at the field scale during an aquifer-storage and recovery experime...
متن کاملComparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data
In recent years, determining bearing capacity of piles from in-situ testing data as a complement to static and dynamic analysis has been used by geotechnical engineers. In this paper, different approaches for estimating bearing capacity of piles from SPT data are studied and compared. A new method based on N value from SPT is presented. Data averaging, 
failure zone and plunging failure of p...
متن کاملComparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data
In recent years, determining bearing capacity of piles from in-situ testing data as a complement to static and dynamic analysis has been used by geotechnical engineers. In this paper, different approaches for estimating bearing capacity of piles from SPT data are studied and compared. A new method based on N value from SPT is presented. Data averaging, failure zone and plunging failure of pil...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2021
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/1825/1/012015