Geometrical design of micro-textured DLC coatings toward lubricant-free metal forming
نویسندگان
چکیده
منابع مشابه
Nanostructured DLC coatings for self-assembly applications
1 Abstract— The special characteristics and singular properties of diamond-like carbon (DLC) thin films deposited by pulsed DC plasma enhanced chemical vapor deposition (PECVD), such as hardness and wear resistance, are suitable for self assembly applications as protective coating and as nanostructured surfaces. In this master thesis project, nanostructured DLC surfaces will be designed and cha...
متن کاملDLC-Si Protective Coatings for Polycarbonates
In this work, a-C:H:Si (DLC-Si) films were produced onto crystalline silicon and polycarbonate substrates by the rf-PACVD technique from gaseous mixtures of CH 4 + SiH 4 and C 2 H 2 + SiH 4 . The effects of self-bias and gas composition upon mechanical and optical properties of the films were investigated. Micro-hardness, residual stress, surface roughness and refractive index measurements were...
متن کاملBiomedical applications of diamond-like carbon (DLC) coatings: A review
To resist wear, biomedical components require coatings that are exceptionally hard, have low friction, and are bioinert. Diamond-like carbon has been shown to provide this capability and to prevent leaching of metallic ions into the body. There are many ways to deposit such coatings from carbonaceous precursors, and some offer the means to incorporate other elements such as nitrogen, titanium, ...
متن کاملA review of modified DLC coatings for biological applications
Diamond-like carbon (DLC), also known as amorphous hydrogenated carbon (a-C:H), is a class of materials with excellent mechanical, tribological and biological properties. By the addition of other elements into the DLC all of these properties can be changed within a certain range. It will be shown that the ratios of the different proteins adsorbed on the surface can be influenced by the addition...
متن کاملExperimental Investigation of Metal Powder Compaction without Using Lubricant
The main objective of this work was to design a novel device for compaction of metal powders so that the green parts could be ejected with applying a negligible force and without the need for any lubricant in either an admixed form or applied to the die wall. For this purpose a 40 mm diameter one-piece die was envisaged which would elastically contracted 0.076 mm before compaction and after com...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2018
ISSN: 2261-236X
DOI: 10.1051/matecconf/201819013001