Geometrical Error Analysis of Cold Forged AUV Propeller Blade Using Optical Measurement Method
نویسندگان
چکیده
منابع مشابه
Geometrical error analysis of a cold forged AUV propeller blade using optical measurement method
Accuracy is the key issue in the precision forging. Geometric and dimension errors are the two significant defects found in most of near net or net shape manufacturing process. It becomes more critical for complex part such as an AUV propeller blade. In this study, geometric error was quantified by comparing the blade profile obtained from nominal geometry of the blade and the profile construct...
متن کاملTwist springback measurement of AUV propeller blade based on profile deviation
Geometrical error due to twist springback is one of major defects found in the near net or net shape part. It becomes more critical for complex part such as an Autonomous Underwater Vehicle (AUV) propeller blade. In this study, twist springback was quantified by comparing the blade and the die profiles obtained from commercial optical technique namely Alicona system. The results show a differen...
متن کاملAn application of Measurement error evaluation using latent class analysis
Latent class analysis (LCA) is a method of evaluating non sampling errors, especially measurement error in categorical data. Biemer (2011) introduced four latent class modeling approaches: probability model parameterization, log linear model, modified path model, and graphical model using path diagrams. These models are interchangeable. Latent class probability models express l...
متن کاملWhole-blade Propeller Dwi
Introduction PROPELLER [1] is a variant of multi-shot FSE technique, providing a high-resolution DWI with excellent immunity to offresonance. Its self-navigated nature around the center of K-space also allows for motion correction. The odd/even echo phase inconsistencies in the non-CPMG echo train were addressed using the “split-blade” method [2], where the blade width was reduced by a factor o...
متن کاملPropeller blade stress estimates using lifting line theory
OPENPROP, an open-source computational tool for the design and analysis of propellers and horizontal-axis turbines, is extended to provide estimates of normal stresses in the blades for both onand off-design operating conditions. The numerical model is based on propeller lifting theory, and the present implementation of the code includes an analysis capability to estimate the off-design perform...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials Research
سال: 2011
ISSN: 1662-8985
DOI: 10.4028/www.scientific.net/amr.383-390.7117