Glass Reinforced Plastic in Construction: Engineering Aspects
نویسندگان
چکیده
منابع مشابه
Machinability of glass fiber reinforced plastic (GFRP) composite materials
This paper deals with the study of machinability of GFRP composite tubes of different fiber orientation angle vary from 30 to 90. Machining studies were carried out on an all geared lathe using three different cutting tools: namely Carbide (K-20), Cubic Boron Nitride (CBN) and Poly-Crystalline Diamond (PCD). Experiments were conducted based on the established Taguchi’s Design of Experiments (DO...
متن کاملAnalysis of the Flexural Behaviour of Glass Fiber-Reinforced Plastic
Glass fibre reinforced polymer (GFRP) profiles are finding increasing applications in civil engineering structures, owing to the several advantages they offer over traditional materials. However, due to the combustible nature of their polymer matrix, there are well-founded concerns about their behaviour at elevated temperature and under exposure to fire. These concerns are hindering the widespr...
متن کاملHydroxyapatite Whisker Reinforced 63s Glass Scaffolds for Bone Tissue Engineering
Bioactive glass (BG) is widely used for bone tissue engineering. However, poor mechanical properties are the major shortcomings. In the study, hydroxyapatite nanowhisker (HANw) was used as a reinforcement to improve the mechanical properties. 63s glass/HANw scaffolds were successfully fabricated by selective laser sintering (SLS). It was found that the optimal compressive strength and fracture ...
متن کاملParameter optimization in milling of glass fiber reinforced plastic (GFRP) using DOE-Taguchi method
INTRODUCTION Optimization of machining parameters is essential for improving expected outcome of any machining operation. CASE DESCRIPTION The aim of this work is to find out optimum values of machining parameters to achieve minimal surface roughness during milling operation of GFRP. DISCUSSION AND EVALUATION In this machining operation speed, depth of cut and feed rate are considered as pa...
متن کاملRevealing homogeneous plastic deformation in dendrite-reinforced Ti-based metallic glass composites under tension
The tensile plastic deformation of dendrite-reinforced Ti-based metallic glass composites (MGCs) was investigated. It was found that there is a critical normalized strain-hardening rate (NSHR) that determines the plastic stability of MGCs: if the NSHR is larger than the critical value, the plastic deformation of the MGCs will be stable, i.e. the necking and strain localization can be effectivel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Engineering Materials and Technology
سال: 1981
ISSN: 0094-4289,1528-8889
DOI: 10.1115/1.3224977