Globally Unified ZVS and Quasi-Optimal Minimum Conduction Loss Modulation of DAB Converters

نویسندگان

چکیده

Due to the quick development of wide bandgap power devices, density converters is expected be much higher. In order increase and efficiency dual-active-bridge (DAB) converter, especially under light load, a quasi-optimal current root-mean-square (rms) control strategy achieve All-zero-voltage switching (ZVS) proposed by taking inductor rms optimization algorithm into account in this article. First, constraint conditions for realizing ZVS all devices different operating modes are concluded analyzing mode working principle DAB converter triple-phase-shift (TPS) modulation. The domain All-ZVS operation each further obtained. Then, global optimal (GOC) combined with condition derive novel modulation modes. Based on scheme, switches can improved, system load optimized. With operation, frequency raised. Finally, GaN HEMT-based prototype was built, 200 kHz, effectiveness scheme verified experimental results.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Globally Optimal Regions and Boundaries as Minimum Ratio Weight Cycles

We describe a new form of energy functional for the modelling and identification of regions in images. The energy is defined on the space of boundaries in the image domain, and can incorporate very general combinations of modelling information both from the boundary (intensity gradients, . . . ), and from the interior of the region (texture, homogeneity, . . . ). We describe two polynomial-time...

متن کامل

Analysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype

One of the difficulties with PWM switching converters is high switching loss and electromagnetic interference due to switching at non-zero voltage and current, which limits the operating frequency. In order to reduce the converter volume and weight (by increasing the frequency) and reducing switching losses, zero voltage and current switching methods are recommended. In this paper, four main ze...

متن کامل

Analysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype

One of the difficulties with PWM switching converters is high switching loss and electromagnetic interference due to switching at non-zero voltage and current, which limits the operating frequency. In order to reduce the converter volume and weight (by increasing the frequency) and reducing switching losses, zero voltage and current switching methods are recommended. In this paper, four main ze...

متن کامل

Unified Steady-State Analysis of Soft-Switching DC–DC Converters

In this paper, based on the switching cell approach, a unified steady state analysis for families of soft-switching dc–dc converters with complete unified design equations will be presented. The concept of the unified approach and step by step procedure for a generalized process are discussed and applied to selected soft-switching families such as zero-voltage-switching (ZVS) and zero-current-s...

متن کامل

COMPARISON BETWEEN MINIMUM AND NEAR MINIMUM TIME OPTIMAL CONTROL OF A FLEXIBLE SLEWING SPACECRAFT

In this paper, a minimum and near-minimum time optimal control laws are developed and compared for a rigid space platform with flexible links during an orientating maneuver with large angle of rotation. The control commands are considered as typical bang-bang with multiple symmetrical switches, the time optimal control solution for the rigid-body mode is obtained as a bang-bang function and app...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: IEEE Transactions on Transportation Electrification

سال: 2022

ISSN: ['2577-4212', '2372-2088', '2332-7782']

DOI: https://doi.org/10.1109/tte.2021.3131192