GMR Sensor Utilization for PCB Inspection Based on the Eddy-Current Testing Technique
نویسندگان
چکیده
منابع مشابه
Eddy-current Testing with Gmr Magnetic Sensor Arrays
The advent of GMR magnetic sensors and GMR sensor arrays with frequencyindependent sensitivity offers improvements in speed, depth, and resolution in eddy-current testing. Arrays of GMR magnetic sensors allow rapid scanning of an area for defects in a single pass. The small size and low power consumption of these solid-state magnetic sensors enable the fabrication of compact arrays of sensors o...
متن کاملDetection of Hidden Flaws with GMR-Based Eddy Current Technique
Nondestructive inspections involving multi-layered structures often require a reliable NDI methodology to estimate size and location of a flaw with quantitative information about width and depth. Compared to conventional wire-wound pick-up coil based eddy current NDI methods, Giant Magneto-resistive (GMR) sensor based eddy current methods have shown a much better sensitivity (20–50 times) for a...
متن کاملAn Eddy Current Testing Platform System for Pipe Defect Inspection Based on an Optimized Eddy Current Technique Probe Design
The use of the eddy current technique (ECT) for the non-destructive testing of conducting materials has become increasingly important in the past few years. The use of the non-destructive ECT plays a key role in the ensuring the safety and integrity of the large industrial structures such as oil and gas pipelines. This paper introduce a novel ECT probe design integrated with the distributed ECT...
متن کاملBare Pcb Inspection by Mean of Ect Technique with Spin-valve Gmr Sensor
The high-sensitive micro eddy-current testing (ECT) probe composed of planar meander coil as an exciter and spin-valve giant magneto-resistance (SV-GMR) sensor as a magnetic sensor for bare printed circuit board (PCB) inspection is proposed in this paper. The high-sensitive micro ECT probe detects the magnetic field distribution on the bare PCB and the image processing technique analyzes output...
متن کاملA Steel Ball Surface Quality Inspection Method Based on a Circumferential Eddy Current Array Sensor
To efficiently inspect surface defects on steel ball bearings, a new method based on a circumferential eddy current array (CECA) sensor was proposed here. The best probe configuration, in terms of the coil quality factor (Q-factor), magnetic field intensity, and induced eddy current density on the surface of a sample steel ball, was determined using 3-, 4-, 5-, and 6-coil probes, for analysis a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Magnetics Society of Japan
سال: 2004
ISSN: 1884-6726,1346-7948
DOI: 10.3379/tmjpn2001.4.39