Gold Recovery from Scrap Electronic Solders by Fused-Salt Electrolysis
نویسندگان
چکیده
منابع مشابه
Using Taguchi Method to Optimize Recovery of Bismuth by Electrolysis
This paper presents a methodology, based on the taguchi parameter design approach, for the optimization of process parameters for bismuth recovery from aqueous solutions. The process parameters considered are [Bi3+], [NaCl], temperature, and cathodic current density. In addition, cell voltage and current efficiency as two responses have been considered. An orthogonal array L9, the signal-to-noi...
متن کاملRecovery of gold from computer circuit board scrap using aqua regia.
Computer circuit board scrap was first treated with one part concentrated nitric acid and two parts water at 70 degrees C for 1 h. This step dissolved the base metals, thereby liberating the chips from the boards. After solid-liquid separation, the chips, intermixed with some metallic flakes and tin oxide precipitate, were mechanically crushed to liberate the base and precious metals contained ...
متن کاملA new approach for the recovery of precious metals from solution and from leachates derived from electronic scrap.
A new approach is described for the recovery of precious metals (PMs: Au, Pd and Ag) with >99% efficiency from aqueous solution utilising biogas produced during the aerobic growth of Klebsiella pneumoniae. Gold was recovered from electronic scrap leachate ( approximately 95%) by this method, with some selectivity against Cu. The recovered PM solids all contained metal and sulphur as determined ...
متن کاملLeaching studies for metals recovery from printed circuit boards scrap
In this paper, the leaching behavior of the major metals present in printed circuit boards waste is evaluated, aiming at its recycling by hydrometallurgy. Several leachants were compared (sulfuric, hydrochloric and nitric acids, at 2 M H concentration), at temperatures of 25oC and 90oC and 4 hours of reaction time. Sulfuric acid leaching was not very promising concerning metals dissolution bein...
متن کاملusing taguchi method to optimize recovery of bismuth by electrolysis
this paper presents a methodology, based on the taguchi parameter design approach, for the optimization of process parameters for bismuth recovery from aqueous solutions. the process parameters considered are [bi3+], [nacl], temperature, and cathodic current density. in addition, cell voltage and current efficiency as two responses have been considered. an orthogonal array l9, the signal-to-noi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOM
سال: 1970
ISSN: 1047-4838,1543-1851
DOI: 10.1007/bf03355625