Grain-Boundary, Glassy-Phase Identification and Possible Artifacts
نویسندگان
چکیده
منابع مشابه
Grain boundary pinning and glassy dynamics in stripe phases.
We study numerically and analytically the coarsening of stripe phases in two spatial dimensions, and show that transient configurations do not achieve long ranged orientational order but rather evolve into glassy configurations with very slow dynamics. In the absence of thermal fluctuations, defects such as grain boundaries become pinned in an effective periodic potential that is induced by the...
متن کاملEffect of Grain-Boundary Phase
Two types of hot-pressed silicon nitride, one having an amorphous grain-boundary phase (6 wt% yttria, 3 wt% alumina) and the other having a predominantly crystalline grain-boundary phase (8 wt% yttria, 1 wt% alumina), were tested on a split Hopkinson pressure bar with a momentum trap, such that, in each test, the sample was subjected to a single predefined stress pulse and then recovered withou...
متن کاملAnelastic Grain-Boundary Sliding in Ceramics. II. Polycrystals with Glassy Boundaries
Systematic experimentation on grain-boundary sliding of ceramics with a glassy film at grain boundaries has been carried out by low-frequency internal friction technique up to =2200K. A model silicon nitride polycrystal was selected for this basic investigation in which the grains were continuously encompassed by a nanometre-sized film of pure SiO, glass. The SiO, film was also doped with incre...
متن کاملIdentification of Grain Boundary Contours at Atomic Scale
Nowadays image acquisition in materials science allows the resolution of grains at atomic scale. Grains are material regions with different lattice orientation which are typically not in equilibrium. At the same time, new microscopic simulation tools allow to study the dynamics of such grain structures. Single atoms are resolved in the experimental and in the simulation results. A qualitative s...
متن کاملFive-parameter grain boundary distribution in grain boundary engineered brass
We report the first application of a five-parameter determination of grain boundary types to grain boundary engineered alpha-brass. The most important findings were that the distribution of planes showed a prevalence of <110> tilt boundaries, especially asymmetric tilt types, and the presence of <111> twist boundaries. This distribution resulted from the low energy of these boundary types.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MRS Proceedings
سال: 1985
ISSN: 0272-9172,1946-4274
DOI: 10.1557/proc-62-427