Graphene-based microsrtip patch antenna for x-band application
نویسندگان
چکیده
منابع مشابه
Modified U-Slot Stacked Micro-Strip Patch Antenna for Ultra-Wideband Applications in S Band, C Band and X Band
The U-slot micro-strip patch antennas were originally developed for bandwidth broadening applications. This study presents a transmission line feed to modify the U-slot stacked rectangular micro-strip patch antenna for Ultra-Wide Band (UWB) communications. The modified antenna has a U-cut loaded with parallel slits and corner slots and is printed on a dielectric substrate of FR4 with relative p...
متن کاملDual Band Slotted Patch Antenna for On/Off-body Communication
Body Centric Wireless Communication (BCWC) has been topic of much research in recent years. In this manuscript, a novel low-cost microstrip patch antenna is designed for on-/off-body communication with a dual-band operation. The proposed structure exhibits a monopole-like radiation pattern at 2.45 GHz and a broadside radiation at 4.8 GHz, simultaneously. Lateral dimensions of 42 mm × 46 mm and ...
متن کاملCompact Notch Loaded Microstrip Patch Antenna for Wide Band Application
In this paper, compact notch loaded microstrip antenna is analyzed using Zeland IE3D simulator and circuit theory concept. Analysis on varying thickness, dielectric constant, length and width of the notch has been reported. The bandwidth obtained by the proposed antenna is about 41.8%. Key WordsWide band, Microstrip Patch Antenna, Return Loss, Dielectric Substrate.
متن کاملDual Band Microstrip Patch Antenna for IEEE802.11b Application
In this paper, the design of a coaxial feed single layer rectangular microstrip patch antenna for IEEE802.11b application is presented. The proposed antenna is designed by using substrate FR4_epoxy having permittivity of about 4.4 and tangent loss of 0.013. The characteristics of the substrate are designed and to evaluate the performance of modeled antenna using HFSS v.11 EM simulator, from Ans...
متن کاملDesign of Single Band Rectangular Patch Antenna for WLAN Application
A microstrip patch antenna for WLAN application is proposed. The antenna has a frequency bandwidth of 196 MHz (5103MHz 5300 MHz). The microstrip antenna has a planar geometry and consists of a ground, a substrate, a patch and a feed. The basic theory and design are analyzed, and simulation using CST Microwave Studio commercial software is employed to optimize the antenna's properties. Results s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Innovative Science and Engineering (JISE)
سال: 2019
ISSN: 2602-4217
DOI: 10.38088/jise.657221