Gratings for metrology and process control 1: A simple parameter optimization problem
نویسندگان
چکیده
منابع مشابه
Improved Optimization Process for Nonlinear Model Predictive Control of PMSM
Model-based predictive control (MPC) is one of the most efficient techniques that is widely used in industrial applications. In such controllers, increasing the prediction horizon results in better selection of the optimal control signal sequence. On the other hand, increasing the prediction horizon increase the computational time of the optimization process which make it impossible to be imple...
متن کاملsolution of security constrained unit commitment problem by a new multi-objective optimization method
چکیده-پخش بار بهینه به عنوان یکی از ابزار زیر بنایی برای تحلیل سیستم های قدرت پیچیده ،برای مدت طولانی مورد بررسی قرار گرفته است.پخش بار بهینه توابع هدف یک سیستم قدرت از جمله تابع هزینه سوخت ،آلودگی ،تلفات را بهینه می کند،و هم زمان قیود سیستم قدرت را نیز برآورده می کند.در کلی ترین حالتopf یک مساله بهینه سازی غیر خطی ،غیر محدب،مقیاس بزرگ،و ایستا می باشد که می تواند شامل متغیرهای کنترلی پیوسته و گ...
In-situ Metrology for Deep Ultraviolet Lithography Process Control
Submicron Deep Ultraviolet (DUV) photolithographic processes present significant manufacturing challenges due to the relatively small process windows often associated with these technologies. The sensitivity of the process to small upstream variations in incoming film reflectivity, photoresist coat and softbake steps as well as the bake plate temperature can result in the final critical dimensi...
متن کاملOptical Metrology Solutions for 10nm Films Process Control Challenges
Controlling thickness and composition of gate stack layers in logic and memory devices is critical to ensure transistor performance meets requirements, especially at 10nm node due to the 3-d geometry of devices and tight process budget. It has become necessary to measure and control each layer in the gate stack before and after dielectric and metal gate deposition sequences. A typical gate stac...
متن کاملA Quality by Design Approach for Coating Process Parameter Optimization
Film coating is an essential unit operation in tablet manufacturing. Most tablet dosage forms in the market are film coated. The main purpose for coating of immediate release film dosage form is to provide colour identification, to enhance the stability, taste masking. It is also noted that film coating can improve the processibility and handling during pharmaceutical manufacturing and is the m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Optics
سال: 1984
ISSN: 0003-6935,1539-4522
DOI: 10.1364/ao.23.000571