Growth Monitoring of Internal Surface Crack by Strain Measurement of External Surface (Part II: Fatigue Crack Growth Monitoring by Multiple Strain Measurement Method)
نویسندگان
چکیده
منابع مشابه
Crack Monitoring and Strain Measurement in Asphalt Mixture by Digital Image Correlation
A full field method for the description of in-plane strain fields is applied for improving Asphalt Mixture cracking behaviour insights. A Digital Image Correlation (DIC) system based on the Least Square Matching technique is used to compute strains and depict crack path in the process from microcrack initiation to failure. A Brazilian test was performed using hole-notched specimens. The test ge...
متن کاملFatigue Crack Growth Monitoring of an Aluminum Joint Structure
The detection, location, and sizing of a fatigue crack emanating from a fastener hole in an aluminum plate is investigated. Two linear arrays of surface mounted piezoelectric disk transducers send and receive ultrasonic guided waves that are transmitted, reflected, and scattered by both the joint geometry and the fatigue crack. A tomography algorithm is used to detect and locate the crack. Ampl...
متن کاملAnalysis of Surface Crack Growth under Rolling Contact Fatigue
Understanding the fatigue crack growth phenomenon in railheads requires a study of driving forces such as the crack tip opening and sliding displacements, under repeated rolling contact. Finite element simulations, allowing elastic-plastic deformation, and mixed-mode crack growth laws were utilized to demonstrate that the fatigue crack growth rates display a minimum after a finite amount of cra...
متن کاملMonitoring fatigue crack growth and opening using antenna sensors
Fatigue cracking is one of the most common failure modes of various load-bearing structures. Even though sensors of many different types have been developed for crack detection, very few can monitor crack growth with a high sensitivity. This paper presents an antenna sensor that is capable of monitoring the growth of fatigue cracks with a sub-millimeter resolution. According to microstrip patch...
متن کاملAn ultrasonic method for dynamic monitoring of fatigue crack initiation and growth.
Attached ultrasonic sensors can detect changes caused by crack initiation and growth if the wave path is directed through the area of critical crack formation. Dynamics of cracks opening and closing under load cause nonlinear modulation of received ultrasonic signals, enabling small cracks to be detected by stationary sensors. A methodology is presented based upon the behavior of ultrasonic sig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2011
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.77.2012