HACS: Helical Auxetic Yarn Capacitive Strain Sensors with Sensitivity Beyond the Theoretical Limit (Adv. Mater. 10/2023)
نویسندگان
چکیده
Capacitive Strain Sensors In article number 2209321, Tyler J. Cuthbert, Carlo Menon, and co-workers present a novel capacitive strain sensor that accesses sensitivity beyond the theoretical limit. The helical auxetic (HACS) employs two-component yarn structure allowing tuneable accessible ranges. HACS is found to be from an engulfment phenomenon, which predicted with geometric model analyzed by X-ray μCT scanning.
منابع مشابه
Carbon nanotube yarn strain sensors.
Carbon nanotube (CNT) based sensors are often fabricated by dispersing CNTs into different types of polymer. In this paper, a prototype carbon nanotube (CNT) yarn strain sensor with excellent repeatability and stability for in situ structural health monitoring was developed. The CNT yarn was spun directly from CNT arrays, and its electrical resistance increased linearly with tensile strain, mak...
متن کاملStrongly enhanced sensitivity in elastic capacitive strain sensors
Citation Kollosche, Matthias et al. " Strongly enhanced sensitivity in elastic capacitive strain sensors. Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use. The MIT Faculty has made this article openly available. Please share how this access benefits you. Your story matters.
متن کاملA comparative study between yarn diameter and yarn mass variation measurement systems using capacitive and optical sensors
This paper reports a comparative study between yarn mass and yarn diameter measurement systems using a differential capacitance tester and an optical coherent signal processing diameter tester respectively. A full description of the systems is presented along with their new contributions, namely 1mm length samples analysis for a capacitive tester and optical signal processing to eliminate the i...
متن کاملIdentification of Yarn Periodical Errors Using Signal Processing Techniques Based on Capacitive and Optical Sensors Measurements
This paper presents a study to identify the type and location of yarn periodical errors applying three different signal processing approaches based on FFT – Fast Fourier Transform, FWHT-Fast Walsh-Hadamard Transform and FDFI – Fast Impulse Frequency Determination. The errors determination is applied for the mass measurement of yarn using a capacitive sensor and for the measurement of yarn diame...
متن کاملMeasurements of Material Properties Using Differential Capacitive Strain Sensors
This paper describes a laterally deflecting micromachined device that offers high sensitivity and wide dynamic range to electronically monitor the thermal expansion coefficient, tensile and compressive residual strain and Young’s modulus of microstructural materials, as well as the temperature dependence of these properties. The device uses sidewall capacitance between interdigitated tines to s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials
سال: 2023
ISSN: ['1521-4095', '0935-9648']
DOI: https://doi.org/10.1002/adma.202370072