Haptic Intracorporeal Palpation Using a Cable-Driven Parallel Robot: A User Study
نویسندگان
چکیده
منابع مشابه
Four-cable-driven parallel robot
This paper presents design and kinematic analysis for a cable-driven parallel robotic (CDPR) manipulator with four cables, The CDPR manipulator produces a planar motion including two translational and one rotational degrees of freedom. To move the end-effector of CDPR, its kinematic structure is analyzed and the inverse kinematics is formulated in the closed-form solution. The experimental test...
متن کاملA planar parallel 3-DOF cable-driven haptic interface
In this paper, a cable-driven planar parallel haptic interface is presented. First, the velocity equations are derived and the forces in the cables are obtained by the principle of virtual work. Then, an analysis of the wrench-closure workspace is performed and a geometric arrangement of the cables is proposed. Control issues are then discussed and a control scheme is presented. The calibration...
متن کاملCalibration of a fully-constrained parallel cable-driven robot
An identi cation of the model parameters for a parallel cable-driven robot is performed by using both a calibration and a self-calibration approach. The manipulator studied is based on a parallel architecture having 8 cables to control the 6 degrees of freedom of its mobile platform so that the mobile platform is fully constrained by the cables. Under some hypotheses on cable properties, the in...
متن کاملDual Space Control of a Deployable Cable Driven Robot: Wave Based Approach
Known for their lower costs and numerous applications, cable robots are an attractive research field in robotic community. However, considering the fact that they require an accurate installation procedure and calibration routine, they have not yet found their true place in real-world applications. This paper aims to propose a new controller strategy that requires no meticulous calibration and ...
متن کاملTension Optimization for a Cable-Driven Parallel Robot with Non- Negligible Cable Mass
This paper addresses the cable tension distributions of a cable-driven parallel robot with non-negligible cable mass for large dimension mechanisms. A well-known model which describes the profile of a cable under the action of its own weight allows us to take the cable sags into account. In addition, an approach to computing the cable tensions is presented, in which there are two major steps to...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Biomedical Engineering
سال: 2020
ISSN: 0018-9294,1558-2531
DOI: 10.1109/tbme.2020.2987646