Health hazard, cycling and thermal stability as key parameters when selecting a suitable phase change material (PCM)
نویسندگان
چکیده
منابع مشابه
Microencapsulation of Butyl Stearate as Phase Change Material by Melamine Formaldehyde Shell for Thermal Energy Storage
Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT-IR, scanning electron microscopy, SEM, and Differential scanning calorimetry analysis, DSC. FT-IR spectra validated the existence of the butyl s...
متن کاملUse of phase change material (PCM) for the improvement of thermal performance of cold storage
Latent heat storage using phase change materials (PCMs) is one of the most efficient methods to store thermal energy. Therefore, PCM have been applied to increase thermal energy storage capacity of different systems. The use of PCM provides higher heat storage capacity and more isothermal behaviour during charging and discharging compared to sensible heat storage. Moreover, thermal energy stora...
متن کاملTesting of High Thermal Cycling Stability of Low Strength Concrete as a Thermal Energy Storage Material
Concrete has the potential to become a solution for thermal energy storage (TES) integrated in concentrating solar power (CSP) systems due to its good thermal and mechanical properties and low cost of material. In this study, a low strength concrete (C20) is tested at high temperatures up to 600 ◦C. Specimens are thermally cycled at temperatures in the range of 400–300 ◦C, 500–300 ◦C, and 600–3...
متن کاملThermal Analysis of Thermal Energy Storage Systemwith Phase Change Material
Due to fast depletion of conventional energy sources and ever increasing demand of energy, many researchers started paying attention to renewable energy sources.Thermal Energy Storage (TES) is one of the key technologies for energy conservation and has recently been developed to a point where it can have a significant impact on modern technologies. The present work deals with the study of a sph...
متن کاملSynthesis of Ytterbium Tungstate with Excellent Pseudocapacitive Behavior and a High Cycling Stability Material for Supercapacitors
Nanoparticles of ytterbium tungstate prepared through the direct addition of an Yb3+ solution to a tungstate solution, were computed through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS). Further the supercapacitive characteristics of the nanoparticles, as a potential material for constructing electrodes, were eval...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Thermochimica Acta
سال: 2016
ISSN: 0040-6031
DOI: 10.1016/j.tca.2016.01.014