Heat Exchange Modeling in Cooling Fins
نویسندگان
چکیده
منابع مشابه
Improved turbulence modeling of film cooling flow and heat transfer
Film-cooling flows are characterized by a row of jets injected at an angle from the blade surface or endwalls into the heated crossflow. The resulting flowfield is quite complex, and accurate predictions of the flow and heat transfer have been difficult to obtain using traditional two-equation turbulence models employed with ReynoldsAveraged Navier–Stokes (RANS) solvers. Recently, a four-equati...
متن کاملAir-Cooling Effects of Fins on a Motorcycle Engine∗
Effects of the number of fins, fin pitch and wind velocity on air-cooling were investigated using experimental cylinders for an air-cooled engine of a motorcycle. Experimental cylinders that had a various number of fins and fin pitches were tested in a wind tunnel. Then the temperature inside of the cylinder, on the surface of the fins and in the space between the fins was measured. Results ind...
متن کاملCooling Methods in Heat Stroke.
BACKGROUND Heat stroke is an illness with a high risk of mortality or morbidity, which can occur in the young and fit (exertional heat stroke) as well as the elderly and infirm (nonexertional heat stroke). In the United States, from 2006 to 2010, there were at least 3332 deaths attributed to heat stroke. OBJECTIVE To summarize the available evidence on the principal cooling methods used in th...
متن کاملImprovement of Energy Efficiency using Porous Fins in Heat Exchangers
The forced convection heat transfer in high porosity metal-foam filled tube heat exchangers are studied in this paper. The Brinkman Darcy momentum model and two energy equations for both solid and fluid phases in porous media are employed .The study shows that using metal-foams can significantly improve the heat transfer in heat exchangers. Keywords—metal foam, Nusselt number, heat exchanger, h...
متن کاملDiagnosis of Heat Exchanger Scales in Cooling Water Systems
An experimental database is compiled in order to fingerprint the scales formed over the hot surfaces of heat exchangers, in cooling water systems or other systems with similar chemistry. To collect these data, a dynamic simulating pilot plant was designed with considerable application flexibility among which simultaneous flow of water with different velocity and heat fluxes to three simulat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Siberian Federal University. Engineering & Technologies
سال: 2020
ISSN: 2313-6057,1999-494X
DOI: 10.17516/1999-494x-0255